Search results for query: *

I have a customer with an Avaya IP office 500 whose IT person defaulted the system and now there are no licenses in it. Where should I turn next? The SD card number is 1374737062 Any help is appreciated

Just wanted to add when I dial the access code and get second dialtone, dial s number and it times out. Then I get error code err404 0

Ayer doing some digging I found using 2 tmdi cards the clock controller needs to come off one of them and set the primary to the one installed. Good news is my card is up bad news is I can call in on a DID no problem but when I use the access code to dial out it times out and I get a busy Any...

I’ve done more work on this. There’s is actually a t1 on a tmdi card now Loop 2. I created a PRI Loop 1 and built a Route and assigned the channels to it. When I enable the loop all my channels say idle but I have a red CC light on my card My clock is set for primary from the t1 and secondary...

I’m hoping someone can help me program a TMDI to accommodate a PRI. I created a loop and a route but when I try to add channels it won’t let me. There are So many settings in the loop and route programming I don’t know if I got them correct Can someone steer me in the right direction Thanks in...

I have a site that has an option 11 with a point to point t1 it’s using an HDMI card. Will this card work with a PRI? What is needed to upgrade to a PRI? Thanks in advance

I have a customer with an option 11 and I’m trying to figure out how their incoming calls over a PRI are being directed. They have 2 routes built on the PRI...route 0 with 18 trunks and route 4 with 6 members. Trunks in route 0 have atdn 6500 the pilot of voicemail and route 4 trunks have atdn...

Im wondering if anyone can help me set this up...Im a Telco guy not a Network person so excuse my ignorance. I have an NEC VOIP system that I need to do the following...when a phone is plugged into the network it obtains an IP address on the local data network,in the scope it has an option which...

Does anyone know what programming and wiring thats involved in add an AD64 to a 2000IPS ? I have a 2000ips manual but see nothing in it about programming to add ad64...