Search results for query: *

For some reason the default doesn't work . Anyway I figured out how to change it using the same command I posted but I'm not sure if I can display it on the forum. I don't have access to the assistant so I cant try what sbcsu suggested. Thank you.

Greetings! The password to the web interface board is lost and I would like to restore access there. As I understand it, you can set password command CHANGE-STMIB: MTYPE = STMI2IGW, LTU = 2, SLOT = 9, TYPE = WBMDATA, LOG INWBM = "HP4K-DEVEL", PASSWWBM = ???, ROLE = ENGR; The question is...

All inbound calls on DID 2000 are set to reach the attendant console with ext 2030 , problem is when call forward is set on the console only internal calls are forwarded to the destination set , external inbound calls still ring at the attendant, ATNDDID ,ATND , VFGR , VFGKZ , NAVAR are all set...

ok , got it working now, can transfer calls finally. Changing DNNO in richt and ldat to 1-1-90 was what got it working. Thanks to all for the support (specially Iamnothere). Now have to solve the problem in previous post.

I will try with different COT values and see how it goes. There is another thing I was trying to achieve but with no success. We have 2 DPLN's 0 and 1 , Users have to press "9" to dial external numbers. When DPLN 0 is set user dials "9" enters an ID and then Is allowed to dial external numbers...

Added the parameters , still cannot transfer . Here is a trace on the trunk and on a hipath station (2622). Monitor Trunk/Line/Data Line/ISDN Trace : -------------------------------------------------------------------------------- Static Information : Static Data: PEN 01-03-001-022 STNO...

Managed to dial from Hipath to elastix , LCOSV=32 , but still transfer not possible...

First of all thankyou for your explanation. Yes I'm sure about the transfer , I tried it using OptiGuide and flash on analog handsets and it was not possible. Stations are unique on the 2 sites , won't have to worry about that for now but it was good to know about the workaround for future...

What i understood from "Iamnothere" post that DAR=TRNSKY does not sound correct , can you please confirm that TRNSKY , is the right option.Thanks

True , there are other future codes beginning with "#" ,i wanted this as a temporary solution as i realized I can transfer the call by pressing "#" (attended call transfer code set in elastix, i get a dial tone from elastix) if the case was Elastix -> Hipath -> elastix. Can you suggest a...

I will check as you suggested . I have a question a bit off topic , I would like for the users to transfer the call using the # key , I tried by ADD-WABE:CD=#,DAR=TRNSKY; but that didnt work . Thanks for your help.

Here are the KNMAT entries.Please advice if i should alter. DISP-KNMAT:; H500: AMO KNMAT STARTED --------------------------------------------------------------------------- NODE MATRIX FOR NPI = UNKNOWN, LEVEL = 0...

yes TTT is set.

It's configured as DAR=TIE with access code 5 ( all elastix extensions are 5XXXX) . I read the other post but i cant transfer a call on the same trunk circuit. DISPLAY-TDCSU:PEN1=1-02-009-0; H500: AMO TDCSU STARTED +------------------------ DIGITAL TRUNK (FORMAT=L) -------------------------+...

We have a Hipath 4000v3 with a HG 3540/50 V2.0 card for sip trunking with an Elastix system . We can make calls between the systems but cannot transfer calls from the hipath to elastix ( not possible shows on screen) . We can transfer calls from the elastix to Hipath. Some of the scenarios I...