Search results for query: *

I have a mics ksu in one building with a 0x16 in another building hooked up by fiber extenders, my problem is I have 2 sets out of 16 that have issues all other sets are working fine, I have used a m or t series set on the ports but they will still stop working for a bit them start working...

How do i log into the 1120e set and do changes to the data port of the set, i am looking for a settings for negotiation to hard coded the port for 100 Mbit full duplex

The IP phone works if plugged into the switch with a patch cord but not if plugged in at the jack, the jack passes just fine with the tester. I have went into the switch and started to mess with the negotiation settings and hard coded the port for 100 Mbit full duplex and they came back up. I...

The IP phone works if plugged into the switch with a patch cord but not if plugged in at the jack, the jack passes just fine with the tester. I have went into the switch and started to mess with the negotiation settings and hard coded the port for 100 Mbit full duplex and they came back up...

i have priced a power supply for a call pilot 100 and they are around 70 dolars , i no i can get the same volts and amp power suplly for alot less from a store, just wondering if anyoone knows if the positive is in the center or the outside of the plug going into the voicemail.

some sort of coruption, it all started for me after replacing the core when it crashed.

After doing all the updated patches and still nothing, what i have done is a level 2 restore , but first do a backup and then install the backup and that should work .