I think I may have partially answered my question thanks to your GOTO comment. Since the phones read the upgrade file first, the upgrade file will actually point the phone to the 46xxsettings file. So you shouldn’t be getting 46xxsettings files at the root. Just the upgrade file, which then...
Trying to setup AADS from scratch, initially only to support J100 series desk phones, and eventually Workplace and Vantage phones. I'm a bit confused about how a phone is supposed to get its 46xxsettings file.
The AADS documentation tells you to setup DHCP option 242 like this...
Ok I think I've got this resolved most of the way. The documentation on deploying session manager and CM evolution was confusing, and I misunderstood. I thought only 1 NIC was required, when in fact the security module meeds its own. Security module is singable now, and I'm getting 500 - NO...
Right. Did all that, and SM itself looks perfectly fine.
Really pretty much at a loss. I've check and double checked my config against a working one. The inability to ping the security module has gotta mean something. I'm almost tempted to re-deploy SM.
I compared my config to a good config on another system. The config is more or less the same....except on the production config I can ping the SM security module IP address. I can't on my instance. But the security module shows as up!
The only place the security module address is set is in the...
I had the same thought. Changed the signaling group to TCP on port 5060 and updated the entity link to the same.
No change. Still 500 Internal Server Error Destination Unreachable.
DRS appears OK. initDRS completes successfully. Replication in SMGR shows as synchronized. No third party certs, everything was generated by SMGR itself. Everything is on the same subnet, same vlan. Nothing between the 2 to block traffic.
This is the first time I am setting up a new SM instance from scratch. SM/security module is up. CM is up. CM has SMGR's CA trusted and an entity certificate generate by SMGR installed. But I cannot for the life of me get the entity link from SM to CM to come up. It keeps returning 500 -...
No, I'm not kidding!
I've got a small display of old but still working phones in my family room. 1A2, Dimension MET sets, Merlin, etc. All functional and connected to a working system. I ended up with some TIE W-820 phones, so thought I might as well find a KSU for them.
Anyone have an...
Thought I'd ask more of a fun question.
A few people I know and I have "rescued" some older systems recently. Another guy and I have both obtained Western 555's recently. 2 others have "rescued" Rolm Redwoods. Another a Northern SL-1 ST and an analog beige refrigerator Mitel SX-200. There was a...
Hi everyone,
I'm Avaya by day and was interested in the Siemens world, so I picked up an Openscape Business V2 system (really wanted a Rolm 9751 but that's proven difficult). I've got pretty much everything setup the way I want, but I cannot figure out how to configure a DID for external access...
That did that trick.
...also didn't help that I had the ports reversed. Diagram in the service manual is right side up, but the card goes in upside down.
I'm a bit stumped and I hope someone can shed some light.
Working on a freshly defaulted Openscape Business X5 V2 with a UC booster card. I'm a little confused by the administration documentation. It mentions IPV6 being required. The network I am working on is not configured for IPV6. The docs...
Any luck with this?
Hoping you have...but be forewarned that Meridian Mail and CallPIlot are very, very different beasts. There's going to be more fiddling around with CallPIlot to get it totally functional. Especially so if you attempt to install the application editor on a modern PC.
I...
Got an older Aura 5.21 system at home that I have connected to the C*Net collectors network:
Avaya CM <--> Cisco CUCM <--> Asterisk C*Net tandem <--> C*Net collectors network
CM to Cisco is an H.323 trunk. Cisco to the Asterisk tandem is SIP. Asterisk to C*Net is IAX.
Calls work fine for the...
More of a curiosity question than anything...
I've worked on the 3300 before, but I'm touching an SX-200 for the first time (an old ELx). Trunks are PRI, but not getting the double ring-back like I expect on the 3300. There's a clear option in COS for it on the 3300, but not the 200.
Did the...
So..I'm an Avaya guy who purchased a second hand HiPath 3800 out of curiosity. Unfortunately, despite a promise it was complete and working, its missing its MMC card and IVM hard drive.
Do I have any hope of recovering from this? Even if I can get a new MMC created not sure how I'd get around a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.