Search results for query: *

Replacing a lightning damaged unit with a known good one. HAVING trouble getting into the VME Pro admin via rs-232 port. It has been many years since I had to do that. The com port on my laptop set to 9600 8-none-1 no flow. System will reboot from VUP <system reset> but comes back with <system...

We have amber lights displaying on a digital station card on ports 4,5,6,7 after the system fully boots. The ports seem to work and detect the type of phone connected, they show a green light along with the amber when plugged in. The system was defaulted and started from scratch .... anyone know...

We would like the IP403 3.2 system that we are playing with to present as did our old Avaya analog system . Off hook one dial tone (high), dial 9 (or line button) standard dial tone. We've tried to enable "secondary dial tone" in [9] codes but that doesn't seem to do the trick. Thanks for any...

Thanks for the tip. Actually... turns out that Administrator/Administrator unlocked this system. Have a great day, JEB@NSI

HAVE DONE A DTE X2 AND X4 AND PREVIOUSLY A SECURITRESETALL STILL UNABLE TO ENTER system/PASSWORD WITHOUT "FAILED TO LOGIN TO IP OFFICE, CAUSE (ACCESS DENIED)" USING THE DEFAULT SYSTEM password. Op system 3.2 (56) using Manager v.52 (69). Discover seems fine. Security system password works and...

Thanks fro your comments Guys, Have removed the analog trunk card, re-defaulted the system, checked that we are using 5.2 manager on this 3.2 IP403, set the management computer to static 192.168.42.203 255.255.255.0 with no gateway. Can Ping 192.168.42.1 ... have created a new config in manager...

Thanks Guys, Got into the DTE did an eraseconfig and a erasenvconfig. Was able to ping 192.169.42.1 However can not Discover/select an IP-office when asked to open configuration from IP Office, no device is displayed. System monitor will read the system. Displaying the following about once a...

Have a used but supposedly defaulted IP403 sent to us by a client to pre-configure. We are new to this IP System, but have done loads of Avaya analog systems. following the directions, we seem to not be able to establish a valid connection with the switch. link lights OK, Green flashing when...