Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
AiroNet Transmit Key
Lately, I came across an old setup with two CISCO AiroNet Wireless Bridge. It is a simple one to one bridge to carry the traffic across two buildings. One station is set up as root, the other is non-root. It carries two vlans across the bridge. I found out that is the keycode <transmit key>... -
Vlans not active between HP procurve and Cisco
Thanks guys for the hints. I went back to double check the vlans and discovered the vtp mode was enabled and set to client mode. This setting was used when I had my old layer 3 cisco switch as vtp server. I set the vtp mode to transparent. Al happy now. -
Vlans not active between HP procurve and Cisco
Hi, In my original configuration, I set up a trunk of 3 vlans between my cisco 3750 and HP procurve switche. Vlan 1, 7 and 9 have been working fine. I want to extend it to include vlan 13, so I made the following changes to allow vlan 13 to go through the trunk. Cisco : - switchport trunk...
