Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. kennyt3

    CDR CM 6.X

    Can you paste back a copy of status cdr from your system?
  2. kennyt3

    9608 Duplicated Buttons

    With that setting FBONCASCREEN set to yes in the settings file it also displays the feature buttons on page 1 with the call appearances so what your seeing is normal when that setting is enabled in the settings file. When its set to 0 you only see call appearances on the main/1st page of the phone.
  3. kennyt3

    Avaya Definity compatibilty with analog cordless phones

    Did you try setting the tests field to no on page 1 of the station ports you have hooked up to wireless phones to see if that helps?
  4. kennyt3

    Callmaster 5 on CM6.2 ?

    Taking AvayaTier3's suggestion here are the options on a CM 6.2 system when running add station next 602A1 603A1 603D1 603E1 603F1 606A1 607A1 Looks like the 607A1 is an option for a set type on CM 6.2. list configuration software-versions...
  5. kennyt3

    Denial Even 1195: Circ/Channel Unavail D1=0x3c

    The REHU settings will allow the PBX to try the call again on the current routing preference for another trunk and try the call again. Most likely the provider is telling the PBX that the circuit/channel (b-channel) is unavailable for that call (that's why you get the Denial Event) possibly...
  6. kennyt3

    One-X Attendant set type

    You can use One-X attendant with a PC headset/handset and have the audio go through the application or you can use a PBX extension it doesn't have to be a 302 console for the audio. When you use telecommuter mode which is with a separate extension and not a USB/PC headset/handset make sure you...
  7. kennyt3

    Denial Even 1195: Circ/Channel Unavail D1=0x3c

    On the route pattern that you use for the calls try making the LAR field REHU, this may help you work around this issue.
  8. kennyt3

    MGC Lists - skipping Primary Controller

    On MG2 what does show ip route look like, does it look correct?
  9. kennyt3

    Avaya CM SNMP access problem

    When you try running that command what are you using for an IP address? The web page settings only apply to the Ethernet interface that is defined on that CM server as Customer LAN. So if you try walking a server using any other interface the firewall rules for those other interfaces will stop you.
  10. kennyt3

    Network time server

    What kind of NTP server are you using to provide time to the Avaya servers?
  11. kennyt3

    Avaya CM 5.2 w/SES integration with Exchange 2010 UM

    ncc63725, can you post any SIP traces you may have taken from the SES server?
  12. kennyt3

    What does terms on status summary page indicates?

    parmarvatsal, viewing the same data click on the help button and it will bring up a page that will explain the field you are seeing.

Part and Inventory Search

Back
Top