Hi All,
We have Nortel CS1000 installed in our organization. we are using TM 3.2 for the phones. the TM has been installed on a desktop PC. few weeks back the the TM generated an error that the security dongle is missing. we sent the Dongle to Avaya and ultimately received a replacement for the...
Hi Friend
I have Nortel MAS application installed on IBM x3550 server with Windows 2003 standard.
I wanted to know whether i can reinstall Windows 2003 server from any OS CD or do i need the CD provided by Nortel only. the problem is that the CD that came alongwith the software is only...
Hi All,
I am trying to install Nortel Media Applcation Server 5.1 and Nortel Multimedia conferencing version 5.0.4 on Nortel supplied IBM x3550 server.
I am receiving the following error when i start the NMC console;
"Warning: Failed to retrieve NMC software Version
Check if the Media...
HI Perrypj,
I am doing that, and I can see in my D channel and SIP trace that the called number is my 4 digit number only. and its very normal. but is there any other way from where i can see what my outgoing number is for the SIP calls, other than the D channel and SIP trace.
regards.
Ok,
But how can I see what is my outgoing ANI and the DNIS. I am getting an error from the Far end signalling Server that my ANI and the DNIS is too long.
regards
Hi,
Can anyone help me on this.
I want to reduce the length of my outgoing ANI / DNIS for the SIP calls to other call managers. How can i do this?
regards
Hi All,
here is the SIP Trace:
07/07/2010 19:12:56 LOG0006 SIPNPM: SIPCallTrace: This is Outgoing Message
07/07/2010 19:12:56 LOG0006 SIPNPM: SIPCallTrace:
Message: Outgoing method INVITE(0) chid: 32 Called num: 2220 Far End Signaling IP: 10.0.32.12:5060 Transport:TCP CSeq: 1 INVITE
From...
Hi Arriero,
Yes i have assigned the new zone to route 1
Yes the GW is configured as SIP
When I dial 601008 (Prefix 60, 1008 is cisco number) i get a fast busy after I finish dialing all the digits
OK I will take the SIPCallTrace and send post.
i am using the DN as 60 and it says:
Route found
Routing type - regular route
gives the end point address, i.e cisco
sip protocol - TCP
sip port - 5060
DN type is : Private level 0 regional (CDP steering code)
I am using the DMI table to delete the prefix while dialing so the called number is coming as 1008 instead of 601008. mine is a four digit plan(9997 is my number).
Hi,
I have taken the trace of D Channel. this is what is coming.
FEAT :CRID
FEAT :CDS
FEAT :NCID
PROGRESS: ORIG ADDR IS NOT ISDN
CALLING #:9997 NUM PLAN: PRIVATE/ABBREVIATED (CDP)
CALLED #:1008 NUM PLAN: PRIVATE/ABBREVIATED (CDP)
DCH 1 IMSG CALLPROC REF 000001A0...
HFA is there and its working also. but i think we need conference loop for this.
when i call one phone and press the conference soft button, the first caller is put on hold. i dial the second caller and gets connected. now when i press the conference button again i should get both the parties...
Hi All,
I am having a problem with Conferencing on IP 1120e sets. The button seems to be not working on the sets. This is what has been configured in phones;
DES IPPH
TN 084 0 00 11 VIRTUAL
TYPE 1120
CDEN 8D
CTYP XDLC
CUST 0
NUID
NHTN
CFG_ZONE 001
CUR_ZONE 001
ERL 0
ECL 0
FDN...
Hi Arriero,
I will enable the trace, meanwhile when i dial the prefix, say 30 for the other location i get a busy tone and display on phone that says "Release and try again".
regards
Hi
Can anyone help me out. I have a BCM 400 and its Hard Drive has gone bad. the system cannot detect it. Now I am planning to install a new HDD in the system. I Have BCM imaging tools that came alongwith the BCM but i do not hqave the BCM Image. Can anyone help me out on this. Where can i get...
Hi All,
We have a Nortel CS1000e installation. Now we need to integrate this with three sites running on Welltech SIP PBX 6200 and one site running on cisco call manager 4.1. somehow i have managed to bring all these four into my CS, i.e. the users of these PBX's are able to call my Nortel...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.