Search results for query: *

I guess 1 and 2 can be tested on the bench. The questions are: 1) Which commands to use as the mtu xxxx cannot be used on the F0/0 interface. I can use it on sub-interfaces and on the BVI and on S0/0. 2) The network between s0/0 is a simple T1 cable. I don't know what I can do to troubleshoot it...

"max size...": when I ping from Windows XP using the following: ping xxx.xxx.xxx.xxx -t -l 1500 (of the controller on VLAN 5) I get a "Request timed out" reply. When I use ping xxx.xxx.xxx.xxx -t -l 1468 I get a reply with the times and such. (This is with VLAN 5 Tagged and VLAN 1 UNtagged on...

Good day all, This is the setup: Using this setup I can pass VLAN 1 and 5 traffic. VLAN 1 can ping each of the switches with the command "pin 10.1.30.44 -t -l 1500" or similar. If I try the ping on the VLAN 5 side of things the max size I can get through is 1468. Go above and it dies. Each...

What I've got: ISP->Switch->Microwave T1 <-> Microwave T1->Switch->Static IP xx.xx.xx.8 (VOIP device) What I'd like to do (if possible): ISP->Switch->Microwave T1 <----> Microwave T1->Switch---> (1) |------> (2)...

ok so after reading and reading I figured out I needed to bridge the fastethernet 0/0 and serial 0/0 devices and set up a BVI to make it pass IP's. If anyone wants the setup and links let me know.

Ok. Let me ask this question; can I use these routers to bridge IP's on the same network across the fractional T1 serial0/0? If so what changes do I need to make to the setup above? Thanks for the help.

thread557-1464278 Following the setup listed on the thread above... I've tried to ping devices on either side of the links. Setup computer 1: 10.1.200.101 255.255.255.0 10.1.200.1 router 1, fastethernet0/0: 10.1.200.3 255.255.255.0 router 1, serial0/0: unnumbered fastethernet0/0...