Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. drother

    Single Number Reach - In Reverse?

    Go to Call Routing > Dial Rules > Application Dial Rules. Add New. Put whatever you want in the name and description. For "Number Begins With" I typically put the area codes commonly used in the area for mobile phones. Number of Digits = "10" (for the US), and the Prefix With Pattern will be "9"...
  2. drother

    Called Party Transformation

    Try putting "6666" in the Calling Party Transform Mask of the Route Pattern.
  3. drother

    Single Number Reach - In Reverse?

    Use application Dial Rules to get rid of the leading "9". Also, I know if you use an H.323 PRI (not hairpinned), it will automatically replace the calling number on inbound calls with his local extension associated with the RDP.
  4. drother

    How review history of change on Call Manager Release 7??

    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_1_3/ccmsys/a02mla.html#wp1025731
  5. drother

    CUCM, problem with Music on Hold

    The gateways need a loopback interface to put MoH on the PSTN circuits.
  6. drother

    MoH Problems

    Yes, you need ccm-manager music-on-hold in your config.
  7. drother

    huntgroup of 6 external numbers

    It is standard in 6.1, but requires 2-4 extra DLUs per user.
  8. drother

    huntgroup of 6 external numbers

    You should be able to use Mobile Connect for this.
  9. drother

    Bulk add partition to each CSS

    In UCM 6.x and 7.x, yes you can. Export the CSSes and Partitions under Bulk Admin > Import/Export. Open the .tar files and add them in the appropriate places, and re-upload.
  10. drother

    SRST Incoming External Calls issue...

    Modify your dial-peer to look like this (as you are stripping the 59): dial-peer voice 1000 pots tone ringback alert-no-PI translation-profile incoming ANI incoming called-number . direct-inward-dial Also modify your translation rule (you are adding a "#") voice translation-rule 1 rule 1...

Part and Inventory Search

Back
Top