Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. helpmenow9

    MICS 4.1 added PRI but shows as 24 lines and DID landing at PRIME

    It is a Full PRI. Interesting - I have run into the same problem on the next site - also had 4.1 software but software upgrade past 4.1 seems to solve it too.
  2. helpmenow9

    MICS 4.1 added PRI but shows as 24 lines and DID landing at PRIME

    I had gone through various change the card to loop or ISDN and disable/enable reboot, etc since last night and early today. But the good news is........It just works under the 6.1 software. In theory the Flash 1.9 is not compatible - but it works for us. we do not use anyting but simple...
  3. helpmenow9

    MICS 4.1 added PRI but shows as 24 lines and DID landing at PRIME

    digits are ok - trixbox sees exactly 3 digits when I dial from pstn for various DID and BTN that ride on the PRI. So- sticking the MICS 6.1 into the crate and waiting for it to come up. Taking quite a long time.
  4. helpmenow9

    MICS 4.1 added PRI but shows as 24 lines and DID landing at PRIME

    I'm gonna run down the street and grab a Trixbox (asterisk pbx)with PRI card to see what digits they are really sending. I also just got handed MICS 6.1 - which will give the 2nd Dial Tone - nice to have. I'll install that if the digits are really 3 as expected.
  5. helpmenow9

    MICS 4.1 added PRI but shows as 24 lines and DID landing at PRIME

    curlycord: yeah - it should just work....but I did make line private - am uploading pdf of screen shots for your review - using line 146 to DN 1821 with rec digits 821. Getting "Call Rejected" on cell when calling in - no inward calls. I still think PBX is not seeing the D channel info or...
  6. helpmenow9

    MICS 4.1 added PRI but shows as 24 lines and DID landing at PRIME

    NETWT: One - Provisioning does have only 23 items Two - you mean to say - that calls out would work if CO settings were for T1 but enabler code made card look like PRI? Third: Under lines 001-023 - true thr Prim set was indeed set to the front desk set. That is why all calls rang there !! So...
  7. helpmenow9

    MICS 4.1 added PRI but shows as 24 lines and DID landing at PRIME

    curlycord: Hardware Cardtype shows as PRI !! rlsabin: we confirmed during porting last night that 3 digits were agreed - but I do not have test equip on hand to see what they are sending. Leading digit for most DID is an 8. Pool-A (Module 3 loop card ) access code = 7 No other Dest Codes with 8
  8. helpmenow9

    MICS 4.1 added PRI but shows as 24 lines and DID landing at PRIME

    MICS 4.1 with nvram 1.0 and flashtalk 1.9 Replacing 2 loop cards Module 2 with PRI + Combo + enabler Now- Dest code 9 uses route 001 to get PRI-A Outbound working fine. 3 digits rec for all DIDs landing at prime even though Rec digits for say Line 145 map to extn 821 ring only...

Part and Inventory Search

Back
Top