Search results for query: *

Hello, I have a IPSEC VPN from a 5505 device connecting to HeadOffice. On the ASA5505 I need to know how I can set the local id to a IP address of my choice. ASA5505=DHCP=Router=PublicIP===Internet==PublicIP==HeadOffice The Headoffice IPSEC is set to connect to my public IP + PSK The...

1800 series it is then :) I shall get hold of a unit and start to have a play. This might sound a daft question. For a Branch as I only have a single IPSEC VPN connection to Headoffice + whitelist internet access to selected corporate sites e.g Bank, SFTP. No other traffic is allowed in or...

Hi unclerico, >>clear the crypto sa and let it re-establish I tried this and also saved & restarted the entire unit but this had no effect. I have also over the week tried many many different ideas including bandwidth shaping option with priority given to the PC IP address etc.. All to no...

Hi unclerico In the words of the great homer -- Doh!!! My apologies, I had rushed through a little too fast. I added the command in + removed the second ace and it accepted the configuration. However it did not work as intented, for example: 192.168.210.5 (PC) & 192.168.210.102 (Camera) In...

Hello For service-policy priority-policy interface outside I get ERROR: Class throttle-me has 'priority' set without 'priority-queue' in any interface Which is what I thought I was doing with the last command? Thanks

Hello, Well I had a fun weekend :) I was still having some problems getting it working so I decided to simplify. Instead of using the procurve I plugged a PC and a transmitting network camera into the 5505 and tried to do priority by IP address PC 192.168.210.5 Camera 192.168.210.102...

Hello unclerico, Thank you very much for your advice. I was not aware that the asa did not match 802.1p markings which is what I was doing the procurve 2626. I will brush up on my dscp and try your method out over the weekend and post the results once I have done this. I have a feeling that...

Thank you for the link unclerico It is very usefull and I shall have a go and try to work through it. With regard to marking the traffic close to the source as possible. This was my original plan. What I did was set up two Vlans on a procurve switch Vlan1: Data Priority 7 (High) Vlan2...

Hello I have a ASA 5505 with IPSec VPN link to HeadOffice. The VPN setup works fine. I now want to configure it so IP range Range1 192.168.210.2 - 192.168.210.10 has top priority while Range2 192.158.210.150 - 192.168.210.160 has lowest priority. Range2 consists of ip cameras streaming...