Search results for query: *

Is there any way to send a trap to a NMS when the router changes gateway? I have a 2801 with two WANs, if 0/0 IP SLA fails it switches to the ip route with a higher cost(on 0/1) I would like to be alerted when this happens. Nothing too technical please, I have a very limited knowledge of IOS...

it works like a champ!!!! thanks unclerico and burtsbees

i think i did that in the SDM but i reloaded and re-config'd since then. how do i check? thanks

Ok, i added transport input telet ssh to vty 0 4 and now i can telnet to it. i can type "switch1" and it will telnet to 10.3.4.5 so that is working, but i still can't ssh to it. i used another site as a templated and the other site is working fine. this router is behind a satellite modem so if...

line vty 0 4 login local transport input telnet ssh I can telnet but not ssh into it and something else: ip host switch1 10.3.4.2 ip host switch2 10.3.4.3 but when I try to telnet to it... DTS-xprs-gw01#switch2 % Unknown command or computer name, or unable to find computer address did a er...

Hey Joe, any news on this? thanks, Joe C.

bump anyone have any luck getting it to connect. i will be trying to make this work soon and any tips are great...

This one makes sure NAT doesn't happen between the DMZ subnet and the remote subnet on the other side. access-list nat0_DMZ_to_inside extended permit ip 172.32.1.0 255.255.255.0 192.168.25.0 255.255.255.0 am i missing something?

I have a 5510 with an outside, DMZ, and inside network. a VPN is set up between the DMZ and a remote network. If i ping from a device on the remote network, i see it hit both firewalls and TCP dump shows it hit the server( in the DMZ ) and it leave the server. Then the ASA displays this in the...