Search results for query: *

Hi Guys, It's me again. I still have problems with bcm 50s. One of them powers up, the yellow leds stay steady then go solid red, then both leds flash red. I bought a bcm 50 which worked fine, so I swapped the good hardrive into the faulty unit. Needless to say it made no difference, but here's...

Hi there, Can't ping any ip addresses, because the machine refuses to talk to laptop.It does connect, but there is no . Level 2 reset doesn't make any difference. Removed hdds and checked them on computer for bad sectors or any corruption, but both seemed fine.I borrowed a bcm400 to get element...

Hi (again), I tried to communicate via laptop element manager on the bcm50 switch, and nothing. when you put ip address in it just says detector"bcm detector cannot find device type" Is the system goosed? Thanks in advance, Gerry

Hi Again, thank you all so much for taking time to answer my query and for your patience. To be honest, if I get one exchange working out of three, I'll be well pleased.(I have another one with both leds staying yellow on power up, and have been told the that the hard drive is faulty, although...

Hi, many thanks for reply. I tried level 2 reset, and leds went through sequence until both red, but after about ten minutes the green leds flash, then the system goes back to power led green(steady) and status led yellow(steady). I have noticed that the green leds above the 4 RJ ports flash...

Hi All, I've got 2 BCM 50 units with same fault.When you power up the system, the power light goes to steady green, but status light stays yellow. I've tried reset, and I've even swapped the hdd drives, but no difference. Thanking all in advance.