Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Problems configuring Cisco 877w Router
you need to upgrade the Memory. how ever i am not sure if you be able to erase some of your file from the memory. you memory is at max. 118784K/12288K. this is not enough to save the run-conf while it is operating. because you are on the dynamic IP fro m Verizon, every time you view a web page... -
Problems configuring Cisco 877w Router
no interface is required for this command, however if you are on the old version of the Software this command will ot work. but just to be sure your software is uptodate give me show ver on the enable CLI. and try the CLI command line in the config mode. it might work. -
Stubborn TFTP checksum errors on 2513 Flash
well don't worry about the reply. however the best way to do is to use a TFTP Application not Cisco TFTP that does not work well with the older model. first of all if you are on rommon1> mode do a "dir all then look at your files see if you recognize your older version and use the "rommon #>boot... -
Cisco 2514 Router - Lose IP Address when power goes out
just a suggestion make your fa0/1 which is the 2900s switch to trunk port wiht dot1q and set the other side as well with VTP domain of server on the router. if didn't work try to bump the code (upgrade, may have some bug in the software). -
Problems configuring Cisco 877w Router
hi there, i wounder if you are on the T1 or DSL. cause your MTU is set to 1451. give me a ip route of your network. after all that check your vtp domain and if it is not Transparent try to make adjusment see if it changes. also if that did not help out, try Router(Config)#no ip time-out http ...
