Search results for query: *

Thank you. I did find that forum and I did the hex edit as described and it works.

I have a Sunblade 150 running Solaris 10 and which has a SunPCI3 card. I tried to run Windows XP on the card for the first time this year and got an error message to the effect that the date is set in the future. I discovered that it will run with the year set to 2009 but not with the year set...

No need. Just follow this. 4) Use the scadm command to reset the admin password: a) cd /usr/platform/`uname -i`/sbin b) ./scadm userpassword admin 5) Use the escape sequence "#." to get system back to the alom login prompt. 6) You can now log into the admin account using the...

I have a Sunfire x2100 with two 80G SATA hard drives. I have Solaris 10 installed on one and Winddows 2003 on the other. When powered on the system boots to a Solaris OS selection menu which includes Windows. Selecting Windows results in a blank screen. The menu entry for Windows is...

Thank you for your reply. After posting my request on various forums and newsgroups I now have it workimg. I reset the PMU and installed a PCI video card from a desktop G3.

When trying to sign up get ERROR The page you tried to access was not found on the server. It may have been moved or deleted.

I have an Apple Xserve G5 that won't boot. Specifications are; Dual 2.3 Ghz G5 4 gigs RAM 2x 80 gig SATA hard drives When I press the power button the following happens; Power light comes on. Alert light comes on briefly then goes off. All processor activity lights come on briefly then go off...

I have a question about an Apple Xserve G5 but there doesn't seem to be any Apple server forums.

I had a server with 8 P3s and 8 gigs RAM. Windows Server 2003 32 bit could see all 8 gigs. He needs to activate PAE in Windows to extend the RAM addressing to 16 gigs or 34 bits. Physical Address Extension.

You are probably right. Thus I think I should swap the CPU 1 in the two machines.

I recommend you set up the management processor so you can connect by telnet. There is a way to change the management password but it needs a bootable solaris install.

My 335 uses PC2100 266 Mhz memory but two PC2100 cards I have won't work in it. I think its because they are not ECC.

I have a working xseries 335 which had one 2.4 Ghz Xeon. I took the second CPU from a duel 2.4 Ghz 335 and installed it in the working one. It works. POST and Windows device manager shows two CPUs and a benchmark shows a very significant speed increase. However, soon after power up POST shows...

Thank you for your reply. You are right that LSI has taken over. I finally located a DOS program that I can use to configure the card and I set up a RAID 0 with two external 9 Gig drives. It appears that the DAC960 I have has a 9G per disk limit which is not much use these days. However it does...

I have a Mylex DAC960 SCSI RAID controller PCI card installed in an IBM xSeries 330. I have an external 4mm DAT drive connected and it seems to be working as it should. Documentation says I should get the following prompts before Windows starts to load; Press alt-M to configure, and press alt-R...

I tried to sell my working ML370 on eBay but alas no takers. So I'm wondering if I can use the PCI RAID card in another server. If so what servers is it likely to work in?

I have an IBM xSeries 335 running Windows 2003 on which I have installed the command line processor. logonlocal works but logonip on another computer results in "FAILURE: Connection refused because the SLIM port is disabled or busy" unless I add -t ipmi in which case I get "FAILURE: Invalid...

I just picked up an IBM xSeries 335 from an auction. Although it is dual CPU capable it has one CPU installed. POST says 1 CPU detected but Windows 2003 shows it as having two processors. Device manager shows two and the performance graphs show activity with two processors. The only possibility...