Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
IKE SA is too slow !!!
Hi all, This is a LAB Configuration! (There is 3 Routers) 1. R1 & R2 are Configured with HSRP Protocol and the 2. R1 is the Active Router and R2 is Standby Router 3. 3ed Router KR is connect to the VIP address (HSRP ip address) from R1 & R2 4. I configured VPN tunnel between VIP address and... -
VPN Ipsec config problem
So I finally finish the Troubleshooting :D and I found the problem ! The problem was on the Router (R1) HSRP groupe1 As u sees the Command track fastEthernet 0/1 I put 20 because default it will just minis -10 The problem was after the opposite line go down the both interfaces war at the same... -
VPN Ipsec config problem
KR Router is a C2621 R1 also 2621 R2 also 2621 SW1 is a 2940 SW2 is a 3550 Router Ethernet Port SW SW Port KR e1 SW1 0/7 KR e0 SW1 0/6 R1 e0 SW1 0/1 R1 e1 SW2 0/3 R2 e1 SW1 0/4 R2 e0... -
VPN Ipsec config problem
Hi, No I didn’t setup a mystery Router. And it Looks like I have a new problem no challenge with HSRP :) I can transport data through the VPN without any problem and the HSRP vip 10.1.3.10 is also working without any Problem but the VIP 10.1.2.2 is not working as it should be. EXP: when i´m... -
VPN Ipsec config problem
Hi, thank you very much for the informative Link, finally my VPN config with HSRP is working. Only tricky part is line 9 and 11. I had to give a name for the HSRP and configuring the crypto map on interface its IMPORTEN that i use redundancy <HSRP Name> without that command the redundancy is not... -
VPN Ipsec config problem
Yes your right in mean time I noticed it :) So I deconfig the GRE Tunel and the ipsec profil … anyway I still have the same problem I think because of the HSRP VIP anyway if you can send me a link or guide steps that would be great. And thank you :) -
VPN Ipsec config problem
Yes it´s a lab Config for my trainee final exam Project. The problem is that I get this massage every time when I ping to the other end of the network. *Mar 1 08:31:02.385: IPSEC(validate_transform_proposal): invalid local address 10.1.3.10 *Mar 1 08:31:02.385: ISAKMP (0:5): IPSec policy... -
VPN Ipsec config problem
Hi folks, I configure 2x 2621 routers redundant with HSRP and they [R1 should make a VPN connection with the KR Router]. Some how the VPN connection is not working as I hopped. Hier ist my Config, and im realy thank for any help. KR#show run Building configuration... Current configuration ...
