Search results for query: *

Hi all; Have a somewhat straight forward and known issue, but I can't make sense of it. I'll try to give a concise sequence of events, maybe someone can shed some light on it. 1.) Moved some site(s) to hosted provider from internal (behind NAT firewall) IIS server. 2.) Hosted site now has DNS...

dgrizzard; Thanks, that opened up access so one can "ping" the firewalls. Trying now to open up access to http/https on that public IP, so I can run ASDM software. Tried a command: http x.x.x.166 255.255.255.224 outside failed stating it is inconsistent?? Any ideas, thanks for you help so far.

Here is the config and the Show Int. The gateway (.161) can be pinged via the internet. Interface 0/1 has the assigned valid public IP address and is attached to the active switch. CONFIG: ASA Version 8.2(1) ! hostname ME enable password passwd names ! interface GigabitEthernet0/0...

I get an invalid input detected at ^ at the beginning of the word outside. Am in the config interface mode for that gigabitethernet interface. Interface is up and protocol is up.

I'm trying to setup a default route to get my ASA 5520 on the internet. For some reason, the IOS only wants me to create a route on the Management interface??? I have 4 gigabit ethernet ports available. Actually have a public IP assigned to Gigabit 0/1, but can't assign a static route out to...

Hi all; I am trying to use an insert statement to update a table. I only want to update a few columns, but upon running the query it errors out stating that the other columns can't be NULL values. Anyway around this, as I don't need to "add" info to those particular columns. Thanks in advance.

Hi all; I am trying to setup a 2 way HOST-to-HOST SSL certification, or something of the like. It's not really the same old Server -> Client ssl cert setup, I think? I have my SSL certs installed on the server and the hierarchy with the provider (verisign/GoDaddy) is working. We wish to send...

Hi all; I am trying to get my 506 to sync with my newly installed broadband/cable circuit. Trying not to use a router, thinking I only need a couple of route statements to get to the public side. It's a real simple config file, so it should work? Here's the outside statements I have...

Got it. I reinstalled 2005 and made sure to have authentication mixed and also use the system (sa) account. After installed, logged in as sa to SQL Server Authentication, clicked on the Security tab and then added my admin account. This way I can login either via SQL Server Authentication -OR-...

Hi all; I've seen this error before, but cannot remember how to correct it. After install of 2005 when I try to login to the DB Engine I get the 18456 error, no state shown. I can log into the Analysis and others in the drop-down, but not the engine. User ID is an admin and in all the groups...

Here is my current but "parsed" config file. I left out the access lists and static routes (NAT). Let me know what you think. Thanks, Steve PIX Version 6.3(4) interface ethernet0 100full interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 no...

Thanks for the reply. Ok let's just concentrate on ONE of the T-1's with the cable modem and PIX 506e. Forget about the other T-1 as it's not going to be associated with the office data in or data out. Yes I could just connect an ethernet cable from the cable modem to the 2600 and then to the...

Hi all; Have a question regarding Cisco gear on a Cox cable connection. We currently have a couple of data T-1's going to Cisco 26xx routers and then to Cisco PIX. I am bringing in a faster data pipe with a cable connection and removing one of the T-1's My question is: Can I just run an...

Well I figured it out. It was in fact the latest version of TFTP software by Solarwinds. I went back to an old version of CISCO tftp software and presto it worked. Here's the link for the older version.... http://www.oldversion.com/Cisco_TFTP_Server.html

Hi all; I trying to do password reset on a 506e that I got with the current password unknown. I've gone to the Cisco URL for the reset: http://www-tss.cisco.com/eservice/compass/common/activities/password_PIX.htm monitor> interface 0 0: i8255X @ PCI(bus:0 dev:13 irq:10) 1: i8255X @...

Ok here are the CLI commands for the PIX 506e ver 6.3, looks like they changed from the older 6.2 ver. Just want to help out those who can benefit from it. Bottom line up and running with the internet and VPN. Thanks again all. vpdn group inet1 client configuration address local vpnpool...

Viconsul, thanks for the reply. Here is my config minus some private info: PIX Version 6.3(4) interface ethernet0 100full interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password passwd hostname <HOST> domain-name <DOMAIN> no fixup...

Hi; Yes this an old 506 vpn question. My old 506e running version 6.2(1) failed and was able to find another one. I had the config file so I just dropped it into the other 506e (version 6.3(4)) and was up and running in no time. However I cannot connect to work via a VPN connection on the...

Thanks for the replies on the PIX logs. Yea windows offers up the minimal logs in the sys32 directory as in regards to maybe an IP address (if not spoofed) with Gets, Puts, Posts. I'll try the syslog system. Man I got spoiled with Watchguard in that with the GUI I could see all dynamic...

Hey thanks Burt; How would I cancel/delete that ftp entry once I'm done with that service off my server? Is it just this: no access-list outside_in permit tcp any host <public IP> eq ftp Also I've tried to view stats on the interfaces to watch traffic, via some show commands, but are there...