Search results for query: *

When pressing the directory button on my i2004 phone, I only get intermittent access to the Corporate Directory feature. I have to press the Directory button several time before it displays/or "connects". Running 4.5.88, CS1000 CoRes, CND 2.1 and TM 3.1. Once it's displayed/accessed, the...

On the 24th I received this message in TM: XMI002 XMI0002 l s c Card polling re-established. XMI0002 XFIL 1 Main fiber interface (MFI) local is operational. XMI0002 XFIR 2 Expansion fiber interface (EFI) remote is operational in first expansion cabinet. XMI0002 XFIR 3 Expansion fiber interface...

We have cs 1000 system with BMG at a remote site. We are running 4.50.88. The only way to enable the channels is to use .enlu, and even when enabled I get a one-way speech path going from TDM to IP. We are running the patch referenced in other postings (p20962_1.lsa). Below are some of the...

Exactly the same. Thanks for the heads up about the .htm.

Thanks you. However, I have done that and there is no Mycp.asp file. I don't know where else to look for this file. Do you know if all versions of Mycallpilot use the Mycp.asp file, or might it have a different name in version 4.04.04.33. I'm grasping at straws here. Thanks again, I...

Thank you for the feedback. I thought as much, but wanted to verify. I don't have Symposium.

We have a CS1000 with 4.5 with a PRI and we are getting telemarketers calling all the time, using at least three different numbers. Thanks in advance.

I found all the files referenced in this thread except the Mycp.asp file. I found Mycp.htm, .hhs, .log, .ftp, a few .zip, but no .asp. Can someone tell me what directory this file is in, as I have done an *.asp search and still could not find it. We're running MYCP 4.04.04.33, CPMGR...

i2002 & i2004 phones cs1000 w/4.5 PRI Inbound call to phone - CID works Inbound call to phone, forwarded to another internal phone - CID works Internal call to internal phone, forwarded to external phone (cell phone) - CID works Inbound call to phone, forwarded to external phone (cell phone)...

Thanks all I have it working. After changing the SCPL and doing a datadump (sysload wasn't required). REQ: prt TYPE: ffc TYPE FFC_DATA CUST 0 TYPE FFC_DATA CUST 00 CCRS UNR SCPL 4 SBUP YES FFCS NO STRL 0 STRG ADLD 0 DFLT_SCPW NO

Thanks Triton101. I have been reviewing that section and it appears that I need to define SCPL in LD 15, as it is set to 0. See below. REQ: prt TYPE: ffc TYPE FFC_DATA CUST 0 TYPE FFC_DATA CUST 00 CCRS UNR SCPL 0 FFCS NO STRL 0 STRG ADLD 0 Once I set SCPL and assign a password to the...

Can anyone tell me what must be configured for me to start using Virtual Office? We use i2002 and i2004 phones. Thanks in advance.

Is it possible to password protect the configuration menu only of either the i2002 or i2004? I would like to have the phone function in all other capacities normally. I'm just looking for a way to keep the phone from being reconfigured to work at a different location. We use different voice...

Yep, Military installation. Does anyone know if Rls. 5.0 has the ability to capture the serial numbers electronically? Or does that start in Rls. 5.5? Our 5.0 upgrade will include CPPMs, 512 memory upgrade and some other minor tweaks. Is the 512MB upgrade the minimum for Rls. 5.0 or should I...

Rls. 4.5 - DNS(JITC), CP PIV. Maybe I'm out of luck. We are probably going to Rls. 5.0(latest JITC tested/compliant) soon.

Thanks for the reply. When I execute that coomand, I see Node ID, Hostname, ELAN IP, LDR, SRV, APPS,PBXLINK State,Date,Time and CONNECT ID. However, nothing that indicates a Serial Number. Is the CONNECT ID the Serial Number?

I'm trying to document the serial numbers of my signal servers. Can this be done via CLI or Element Manager and if so, what Overlay do I use? Or do I need to visit each location and read it off the label? Thanks in advance.

.lcnt 3 PRI LOOP 3 TRSH CNT: BPV -000 SLIPD -000 SLIPR -000 CRC -000 LOSFA -000 OS_BPV -000 OS_LOSFA-000 OS_YEL -000 .lcnt 2 DTI LOOP 2 TRSH CNT: BPV -000 SLIPD -000 SLIPR -000 CRC -000 LOSFA -000 OS_BPV -000 OS_LOSFA-000 OS_YEL -000 No errors. So, when you...

What type of problems might I experience if both the carrier and us are providing clocking?

loop 2 is our DSN connection. But you are correct, it doesn't go to the PSTN. I'm very much a nortel novice, so please excuse my ignorance, but what is a clock ref loop? I'm looking to get to the bottom of our intermittent one-way speech path problem and I'm trying to rule-out our gear before I...