Search results for query: *

Sorry that I havent not replied in sometime. I figured out the problem. It did not lie with the VLANs, it was a NONAT issue. I was not pointing the address inward. Thank You for the help.

BR2 and BR3 are the other location that are connected through the VPN with the Pix firewall. I will post the Config tonight, but here is the Visio of what is happening. http://i327.photobucket.com/albums/k456/CaptainDoogles/VLANConfig.jpg

Do I need an ACL on the 3550 f0/1 to allow the traffic in?

I am unable to connect to the VLANs at HQ from Br2 and Br3. But able from HQ to connect to the other locations. 192.168.10.0/24 is an existing network that has the business system on it and the current network. I will be converting over to the other VLANs later. I just need to get the users on...

Yes, the 3550 can ping everything inside the 192.168.10.0/24 network. The gateway of last resort is 172.16.21.2, ip route 0.0.0.0 0.0.0.0 172.16.21.2. The gateway of the PC is 192.168.10.1. That is also the IP of the VLAN 101. On the Pix the routes are: outside 0.0.0.0 0.0.0.0 WAN OTHER...

I have a network already in place that has 3 offices. They connect by using Cisco's Pix and a VPN tunnel. Everything is talking and running fine in this setup. The default gateway is the Pix at each location, the last octet at the location for the Pix is 1. HQ = 192.168.10.0/24 Br2=...

I have a network already in place that has 3 offices. They connect by using Cisco's Pix and a VPN tunnel. Everything is talking and running fine in this setup. The default gateway is the Pix at each location, the last octet at the location for the Pix is 1. HQ = 192.168.10.0/24 Br2=...