Search results for query: *

I have tried to login to PDT on a OPT 11 rel 25.4. It won't let me. The system does not respond at all. I am on a direct serial connection at 19200 baud on TTY 0. I know all about PDT except why this system wont work. I have been told that Release 25 is the same login as release 4.5 which is...

actually, if you can login through PDT, you can use the reboot command for an ini and the reboot -1 for a sysload. I only do this on our 11's though.

Since it is happening on all 5 systems and you are using the RAD to test and not having much luck, I would test onsite with a phone on the original complaining system and quit using the 5 other sites. I would assume since you are using a RAD that you have some drive time. But Also, did you check...

has the Call Pilot been on the network or does it maybe still have the default IP address?

how is your DMI table set up? is it changing the type of call?

Ok, we found the issue. After rebuilding the node in Element manager to change the IP information, this was the setting that was set to NONE. We changed it to H323 and it worked. We had to reboot the signaling server to get the DCH to come up again, but to test it, we rebooted again and it...

have you pulled the history file from the PBX to see if anything is leading up to the failure?

My issue is simple. When our signaling server reboots, the Virtual DCH never establishes on its own. We always have to completely reload the sig server from the CD to get it to work again. I have other sites that don't require this. I have tried DCHmenu from the sig server command line and it...

Interesting thing here...you cannot dial extensions from the General Delivery mailbox, only the Auto Attendant greetings. Maybe the DID calls are going to the Auto Attendant first. Look in your voicemail programming to see if the target lines are being answered by voicemail. If you haven't...

how is the forwarding programmed and when you say "external", do you mean DID calls directly to the set or someone calls the main number and is transferred?

No maintanence function, but I do have a follow-up question, what kind of NAM is it, fiber or copper connections?