It is possible connect BRIA Android sip client to SM, and that this client uses media encryption over TLS?
I configured SM 6.1/CM R6 to use media encryption. All Avaya phones (h3232 and 96xx SIP) are working fine - RTP encryptions is ON.
But, how connect BRIA to SM with TLS encryption for media...
Hello everyone,
I have a problem updating IPSI board. This IPSI is:
IPaddress IPSI Name IPSIBoard HW# FW#
192.168.1.2 ipsi-A01a TN2312BP 12 50
A year ago it was upgraded to FW#050 with no problems. Now, when trying to upgrade to FW#053, we get an...
can influence for this issue that CLAN, MEDPRO interfaces to this time is not upgraded to newest firmware release? We have migrated CM 3.1 to 5.2.1 and replaced S8500 server to these new two servers with software duplication....
after migration all works fine (CCE, Call center, CMS...), but we...
Hi Mitch,
thank yuo very much for posts here...
"My guess is you have wired each server into a separate LAN switch, and that sometimes also causes issues, "because of the "active" server IP being spoofed... try using a single LAN switch as well" - here is impossible connect both servers to one...
Mitch, with ip is all OK. here is used one subnet 10.1.104.0 with subnet mask 255.255.254.0 (\23), and here we have from 10.1.104.1 to 10.1.105.253 ip address space for ip phones, servers and media gateways.
ok,
i will create new network region for PE (for now, 2 CLAN interfaces and PE is on the same network region). Maybe problem is here... :)
Uzumaki, you are using only 96xx phones? We have here mostly 1608 phones. with this type of phones PE (on duplex servers 8730) is compatible?
here is ip...
OK Mitch. but what will be with 16xx type of phones?
16xx we have upgraded to release 1.22, but the problem with that phones still exist. they registers on PE interface not allways. :(
To install Verint ContactStore for Communication Manager on RedHat 4 or 5 from the
command line
1. Log onto the server as root.
2. Mount the installation CD
On RedHat 4 type:
mount /mnt/cdrom
On RedHat 5 type:
mount -r -t iso9660 /dev/cdrom /mnt/cdrom
It may be necessary to create the...
thanks Mitch.
96xx phones is with firmware release 3.0, we upgrading all now to latest release 3.11. 16xx - all is with release 1.22 (latest).
With CLAN interfaces is OK, but, i have only 2 CLAN's for ip endpoints and media-gateways, and we need register 1200 ip phones and 12-14 G430 media...
yes, i know, that PE IP is virtual IP address of LAN interface.
When i enable 'ip-interface procr' on CM, sometimes IP phones registers on PE interface correctly, sometime they shows "Discovering xxx.xxx.xxx.xxx... (PE ip)". When i disable procr interface, phones registers with CLAN interface...
Hello,
I have question about PE (Processor Ethernet) on S8730 servers with software duplication.
I found on "Installing and Configuring the Avaya S8700-Series Server Release 5.2" manual, that:
"The PE interface is always enabled on an S8700-series Server pair for registration by an ESS or an...
Hello,
i found on Communication Manager's software events a lot of registered errors. :(
All errors is like these:
20100119:184224276:128331:hmm(5141):MED:[CM5_proc_err: pro=7171,err=203,seq=38771,da1=0(0x0),da2=1638449(0x190031)]20100119:184224234:128330:hmm(5141):MED:[CM5_proc_err...
Hello all,
I will to configure SIP trunk between CM 5.2 throught SES and external SIP service provider. SIP service provider require authorisation for SIP session. Where i can insert that user name and password on SES configuration?
Hello,
I need help with installation of CSCM 7.8
When installing RedHat Enterprise linux 5 server, and for installation is used ks.cfg script (generated from tool kickstart2.exe, this toll is from CSCM installation disk), what default passwords are set for system users “root” and “witness”?
yes, i found that yeaterday.
all information is in document "Avaya Aura™ Communication
Manager Feature Description and Implementation", in "Telephone Display" section.
Thank you.
I have found, that when i changed 16xx phones language from default English to Russian, and set language back to default English, time is in 24h format. BUT, this works with IP Office system.
With CM 5.2 this is not working :(
Maybe someone has any ideas, how to change time format for 16xx...
Hello,
can 16xx telephones display time in 24 h format, not in 12 (am/pm).
I can't find that parameter in 46xxsettings.txt file for all phones... it is only for 96xx sip phones (set timeformat).... :(
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.