Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
2511 Access Router
I realize that the name and password are sent in clear text. This is not a problem since the router is only on when I turn it on remotely. I have an ethernet power controller. This way I can turn on all the routers when away from home, only problem is I cannot telnet OR ssh into the access... -
2511 Access Router
No ssh on the ios I have installed. So, not an option. Telnet should be fine as it only gives access to my lab. her is the show version Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-IS-L), Version 12.3(20), RELEASE SOFTWARE (fc2) Technical Support... -
2511 Access Router
I have a dynamic address with a long lease, but I also have software running at home that emails me when my IP address changes. I have the private address set in the DMZ. I have also forwarded ports 3099 and 3023 to the private address of the 2511. I am using these ports because I am not sure... -
2511 Access Router
Here is the configuration of the 2511 Access#show run Building configuration... Current configuration : 1443 bytes ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Access ! boot-start-marker boot-end-marker ... -
Create Disk Images???
I would recommend both of the following programs (free or low cost): SuperDuper http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html Carbon Copy Cloner http://www.bombich.com/software/ccc.html They both make exact copies of your hard drive. I keep a SuperDuper copy of my drive...- kindian
- Post #3
- Forum: Macs and iPhones
-
2511 Access Router
I have set up a Cisco 2511 Access server to telnet into my home lab. I can telnet to the 2511 from any computer in the house and then connect to the other routers/switches from there. The problem I have is that I cannot telnet into the 2511 through the internet. This would be a very nice...
