Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Routing
serb, actually, that article proposes that i setup the vpn from each client. however, i need to setup only one vpn tunnel and have all clients (about 5 machines) route specific traffic through that one host with the vpn already up. that way, they can access the remote network and local... -
Routing
brian, the reason i am setting this up is because i dont have the option of setting up a site to site vpn. serb, yes, the split tunnel on the CISCO client works fine. the problem is that it only detects and allows local access to the subnet(s) in the routing table. in my network, that is not... -
connecting CISCO and NORTEL
Bass, already applied "no shut" on vlan1, and dot1q is simply not an available command for trunking. i suppose its the version 12.2, because other switches we have in 12.1 DO have the dot1q command. is dot1q native on the 2960? -
Routing
I setup a single VPN tunnel from a machine within the LAN. No problem there, the Cisco client connects to the outside VPN cluster and all works fine. Now, I need to use it as the gateway for other machines that need the same VPN. The goal is to allow the client to dynamically create routes... -
connecting CISCO and NORTEL
Hi, 1. should one be able to ping the IP address of a switch from the switch itself? already, that doesnt work. 2. Trying to connect a CISCO 2960 (software version 12.2) switch to Nortel 450 Baystack. As we use VLAN's, trunking is configured on both connecting ports, but the two switches...
