I restarted the Nw services stopped nsrmmd processes without success.
The idle device timeout is set but without any effect.
Is there any scsi tool that releases these locks?
Hi All
is there a way to clear persistent reservation on Tape devices?
Sometimes the jukebox cannot unmount tapes saying they are locked by a host although all backup, clone jobs are finished.
The only way I succeedto do it is by rebooting the drive.
Thank you
Hi SDack,
drive access are not on teh same HBA as disks.
We have LTO2 drives.
We had installed the IBM drivers in non exclusive mode since that time problems began.
We reinstalled the same drivers in exclusive mode. The problems seem to be stopped since 10 days.
This is strange because EMC...
Thank you 605
I disabled TUR
cleaned drives.
things are still the same.
Now some tapes, after being written to, become suddently unusable so I tried the following on the same drive
nsrjb -l -n -f <device> <volume> : ok
mt -f <device> status : ok
nsrmm -pv <voulme> : failure
this means that...
I am using Adic scalar i2000
I ran scaner -vvv on several volumes I found 65k
on devices it is set to handler default
I am going to disable TUR.
I checcked Zoning it is ok.
Dear All,
I have the following configuration :
networker server 7.2 on windows 2003SP2
networker dedicted storage nodes : HPUX
networker clients windows and linux backing up on the server .
I have prematurely full tapes especially on windows and linux and not HPUX.
searching on your forum I...
Dear all,
I have networker Network edition on windows 2003
with scalar jukebox and IBM LTO2 drives.
when installing the driver, I had two ways to install :
-exclusive
-non exclusive
I have chosed the exclusive way.
The backup is working fine. But I read on the net that with networker I have to...
I found that the physical scsi address changes every reboot
which
makes the jukebox unusable
I have to delete jukebox and run jbconfig every time I reboot the server
Dear all,
I browsed the forum for threads treating problems like the mine but didn't find.
when I reboot the Networker server. it becomes disabled and I cant enable it again so Ihave to delete it and then rerun jbconfig.
OS : Redhat AS 4u4
Networker server : 7.3
thanks for the help
a060463xyz thank you very much for your kind help ( it has always been the case)
I have tried that and all is working
I was looking for any summary if somebody had an experience with backing to two servers
before applying it in the customer hosts
Things gone very well
the special thing I did is...
excuse me i am not asking you to write scripts for neither to adapt a script
my question is simple
can we ackup to two servers from one clients using nsrnmo
using only one script
or i have to write two scripts
excuse me I didn't have enough time to do all searches
i am pressed y time and had to...
Hi 605
the actual client is client1
it uses nsrnmo and backs up on nwsrv1
I have to back it up on nwsrv2 also
so can I use the same script to save to two servers
or create a new script which sends data to the second server
what do you think are these ways possible or one is better??
dear all,
I have a server with networker client installed and nsrnmo 4.1 installed
I am asked to add it it to another server
so that I will have backup to two servers
Do you think it will be enough to copy paste parameters from client definition on netwoerker server1 to networker server2
ie...
I have to backup an oracle 9i dtabase using networker and the module nsrnmo. so I have to allocate the channel for the rman script.
My networker strategy is using staging so i Have to write on disk before moving data to tape.
what should I choose for the channel type : disk or sbt_tape
if...
Hi a060463xyz
thank you very much for your kind help
have you some docs or link about this difficulty :
With Networker there is an additional difficulty, the control port of the jukebox is not "dynamic" but a fixed property of the library
special thanks
we are using linux Redhat native multipath for persistent binding
and this is done using the wwid in the /etc/multipath.conf
I do not know how to do for tapes?
is it possible to have multipathing for tapes
is there any tool under networker to control this
special thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.