Search results for query: *

Avaya B189 H.323 Conference Phone

All, CM6 Utility Server: Is it at all possible to upgrade firmware on H323 46xx phones, 1 group using the Call-Center firmware 2.9.2 and the other group using Non Call-Center firmware 2.9.2. I don't think both firmware packages can be active at the same time in the Utility Server. Is there any...

Can you follow up on your issue? Was it resolved? What fixed it? thanks, Hudson22

You try the disp alarms/disp errors in ASA using the filters, maybe you can get a hit from the MM that alarmed during that specific time? Hudson22

Did you get more info than what you posted? For example: 0 CMG 22 MAJ N Sun Jan 24 22:17:56 EST 2010 2010-01-24 22:17:56 ###.##.###.### An IP address in your alarms? Hudson22

What are you trying to enter in? Hudson22

Thanks, That worked...Do you have the address to the P330 also? Hudson22

There are three external USB CD/DVD-ROM drives that support the S8400 Servers: Panasonic Digistor 73082 or 73322 TEAC Addonics Are you using one of these drives? Hudson22

All, Is it still possible with System Platform 6.3 on an S8300D either main or lsp, to get to these gateways using telnet 127.1.1.11 from the ACM shell? I couldn't get this to work on any of these GWs. Looking to change IP info remotely without losing my connection. Thanks in advance. G700 G350...

Old info from the install doc: 03-300678 Release 5.2 May 2009 Issue 4 The Microsoft Telnet application might be set to send a carriage return (CR) and a line feed (LF) whenever you press Enter. The Communication Manager installation program sees this as two separate key presses. If you are...

I bet you tried a different copy of 6.3. Hudson22

I would think so....but since I uplugged the IPSI and pinged the IP and got no response we dismissed the duplicate IP issue. Hudson22

Just a long shot: Could check this out, had an issue with a customer: MTU issue: Maximum Transmission Unit. MTU is 1500 Bytes default in Cisco equipment between sites. Avaya recommends MIN 300, MAX 550 bytes. At XXXX they lowered it from 1500 to 1400 and we got dial tone. Hudson22

We had this issue for about a week once, it ended up that a statically assigned IP phone was plugged into the network which was the same IP as one of the IPSI's (duplicate IP). The IPSI would stay up for 15 minutes and then crash, failover to redundant IPSI....Then come back and 15 minutes...

Login to the BSM shell, then try this. /opt/vsp/activateBSM Hudson22

I did run into an issue where one server of a duplex CM on System Platform had the NTP running and the other server did not. Time was not correct on the phones. Hudson22

I now see that this is the same as a post yesterday. Did you try that and it did not work? Hudson22

Check in this location: "change system-parameters features" page 10 System Updates Time On Station Displays If enabled, automatically updates the system time on two-line display telephones when you run background maintenance, for example, when you plug in the telephone set. The system sends...

Thanks that makes sense. But using the resources across an IP based system....doesn't that use up X-fires and bandwidth?

Which resource is choosen by applications first, the IPSI or the TN744/748?