Hi there,
My site with the 222 has static ip.
I was trying to configure BO tunnel profiles, but what IP address should I put for 'Remote EndPoint' field ?
According to the Nortel pdf files:
"The BO tunnel’s remote endpoint is the branch office’s public IP address, for example the Portal
IP...
Hi Guys,
I'd like to setup VPN site-to-site between my office A (vpn gateway 3050) and office B (BSR222), Most likely office B will be client and need access to office A 24/7. Could someone please tell me what I need to set vpn gateway 3050 and BSR 222 so I can have a vpn site-to-site. I have...
Hi guys,
I have a network:
RouterA -Router B -> PIX
From PIX, I can ping router A and B but from router A or B I can't ping the PIX, what is the command to allow routers to ping the PIX? Thanks a lot.
>I connect computer A to VLAN 2 on cat A, and computer B to >VLAN 2 on cat B. They can't ping each other now, how do i >make them can ping each other in same VLAN but on difference >cat ?
I solved this one.
but still stuck with the second question.
Hi guys,
I have a question for this case:
router 2621xm -->cat 2950(A)-->cat 2950(B)-->router 2621xm
I created VLAN 2 and VLAN 3 for both cat A and B. That means, cat A and cat B have VLAN 2 and VLAN 3, I also created a trunking port between cat A and cat B using Fa 0/24 on both cats. I...
Thanks,
But how can I advertise/publish the program via group policy ?
I want user can install the software but don't really want them to have the full administrator permission.
Or how do i give that user full permission for just that computer and then turn off later on ?
Hello,
I currently have AD with windows server 2003, There are 10 client computers and 10 users. How do i let that person A install a software on computer A without giving him admin password ? His user is also in AD, and his user is just regular user and not in admin group.
Thanks
Hi guys,
I have a solaris 10, everytime when i restart my box, then i will lose my dhcp on my nge1. So i have to do this manually in after the reboot:
ifconfig nge1 dhcp
before i do command above, i checked nge1 and see that it was assigned some ip 192.168.1.200. I got this box from one of my...
Hi guys,
I have a sun machine which is running solaris 10. I'd like to remote desktop to it from my wins xp. What do i have to install on that sun machine ?
Thanks.
Hi everyone,
Could anyone here help me to configure Etherchannel load balanching for cat 2950 ? I currently have 2 webservers are running and I'd like to have a load balancing for those 2 webservers. If server1 fails then the traffic will be redirected to server2, or configuration that has 50%...
Hello,
I've seen few cisco cat 2948g, the owner told me there are two kinds of cat 2948g, one is layer 2 and one is layer 3. Are they difference because the IOS inside or the hardware ? they're over all look the same. Thanks
I currently have IPSEC running on pix 515e but I'd like to have SSL VPN for some basic users. So the user will have to use web browser (https) to log in. My pix ver is 7.0.2 and ASDM ver 5.0.2. I heard that only ASA 5500 series can do it but not sure with pix 515e. Have any one got pix 515e work...
Hi Burt,
Whenever you have time, will you post configuration of switch 2950 for load balance of 2 servers ?
http://www.tek-tips.com/viewthread.cfm?qid=1450984&page=1
Thanks alot.
I have heard about CSS 11500 but never heard about SLB. By the way, they're all too expensive for me right now. Will cisco Local Director work for me ?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.