I have exhausted my search engine skills trying to locate this software and have had no luck. I've tried, Google, Bing, DuckDuckGo, Blekko, Yahoo, and HP's own website search. They all turn up the same useless results.
I've encountered another problem, this time with the 3com Central...
Does any one have or know where I can get the last available firmware for the 3com Intellijack NJ240FX? I can find it nowhere on the internet, and HP support did little more than tell me the device was out of warranty and no downloads were available.
Thanks!
I modified from-sip-external to send calls to from-trunk-sip-CS1000 instead of from-trunk. Then, I made your changes to from-trunk-sip-CS1000, and it is now formatting the DID correctly. I'd rather not do it that way, but I suppose it will work for the time being.
I would still be interested...
I think the reason it's not working is because the call in coming into from-sip-external, and never hits from-trunk-sip-external. I tried changing from-sip-external, but it doesn't seem to have done anything.
We also use FreePBX. I think I posted a log in the bug report I mentioned. As I recall, it starts off in from-sip-external, and then to from-trunk. From there, it goes to ext-did, and finally to a custom context for meetme conferencing.
As far as the connectivity between Asterisk and Nortel...
Would you be willing to post your configuration for how you're connecting Asterisk to your CS1000 and vice versa? I tried to implement your fix, but I couldn't get it to work, and I think it may have to do with configuration differences.
Sorry, there was a tiny error in the previous post. The second log entry should be like this:
5 Jun 23 2010 09:49:50 305013 10.4.70.2 Asymmetric NAT rules matched for forward and reverse flows; Connection for icmp src outside:10.4.71.104 dst inside:10.4.70.2 (type 8, code 0) denied due to...
More information - when I ping something on the inside, 10.4.70.2 for instance, I get this in the log:
5 Jun 23 2010 09:43:21 305013 10.4.71.255 137 Asymmetric NAT rules matched for forward and reverse flows; Connection for udp src outside:10.4.71.104/137 dst inside:10.4.71.255/137 denied due...
I'm trying to setup another VPN group and policy. So far, I can connect with it, and I can ping the ASA, but nothing else on the inside. The funny thing is, I've got another group and policy setup that works fine. I've tried to emulate it but I can't figure out what I'm doing wrong. I'll...
Is it possible to reset the CLI password on a Passport 8600 without knowing said password? We have one that no one seems to know the password for. The vendor who installed it does not even know it. We use Device Manager to configure it, but we need CLI also. Thanks for your help.
The issue was with our Barracuda web filter. Any device filtered by it is seen as the Barracuda's IP on the ASA. After I added an exception to the Barracuda for the devices' subnet, the Cisco blocked traffic as usual.
We're having some problems with our ASA 5505. It's letting traffic through to devices that are not permitted access in the ACL. The Packet Tracer in ASDM shows that it should drop packets, but it's not dropping them in reality. To test, I removed the entry in the ACL permitting my laptop...
We have some 6120 wireless handsets that occasionally drop calls with a "Watchdog Timeout" error on the screen. After a several seconds, the phone resets and associates with the AP. I've checked the signal strength, and everything seems to be ok there. So does latency and throughput back to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.