Search results for query: *

Thanks! Wouldn't want to reboot the whole box though. The whole network is on it. Just added two trunks and it went ok. I'd still be interested in a way to go back to the config before I made changes to the running config. In PP2000 and PP7000 it's copy prov. But that's a different CLI...

I am doing a change on the network this evening. I know that I should be able to do the changes and see them in the running config, then scrap them if I don't like it. Could someone please tell me the syntax. Something like [copy start run], right? thanks, David

The powers that be want a fiber module installed into two Business Policy Switch 2000s. The fellow sitting next to me does the cabling, and he needs to connect the following cable: 1M ST/PC-MTRJ/PC 50/125 Duplex Patchcord I would like to clarify all related issues and would appreciate any...

Thanks for all the input. It turns out that the test method was faulty. The card has GB interfaces. To test with a laptop, a GB card on the laptop is required. To test with a loopback plug, the plug would have to have four wires instead of two. Once we connected a laptop with a GB...

The card is a 8616GTE. Ports 2-4, 6, and 13-16 are active. There is no dhcp on the VLAN. But I'm not sure that's relevant. This morning I put an RJ45 loopback plug on both ports 5 and port 13 and they still didn't come up. I'm going in circles trying to get internal support! Could it...

Any advice as to further troubleshooting/ problem resolution? Your help is appreciated.

Thanks for the quick reply!!! Can't get hold of 3rd line support. We have a backlog of tickets and don't want company to look bad. As I rethink this, it may not be a config issue at all. When I hook up the laptop to the switch with a standard ethernet cable, I get "media disconnected". Same...

Please help! I have added a port to a vlan, but it is still showing down. Even putting a cable directly on the port from a laptop does not bring it up. # config vlan 3 ports add 3/12 # save config # sh vlan info ports 3 [can't paste results her, but it shows 3/12 as active member] But...