Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. moonpie0

    BD dropping VLANs / Last reboot posted CRITICAL ERROR: Backplane EEPROM has invalid MAC Address. Sys

    We have been having issues with a BD where the switch quits passing random VLANs. Generally more and more VLANs drop until the switch is rebooted. Then it runs for approximately 7 day before repeating. Running diagnostics didn't turn up any issues. During the last POR the switch posted the...
  2. moonpie0

    Unexplained Latency Cisco 2960 switch

    vipergg-Thank you for your suggestion to check multicast. We configured the VLAN on the uplink layer 3 switch for IPmc forwarding. The change appears to have corrected the problem. Desktop sucessfully downloaded a good image after the change.
  3. moonpie0

    Unexplained Latency Cisco 2960 switch

    Thank you for the responses. This forum has always been a wealth of information. Burt-Setting up the VLAN instead of using default is standard with our company. unclerico- All of the traffic is going accross the g0/2. The switch has been temporarily pulled the and replaced with a switch...
  4. moonpie0

    Unexplained Latency Cisco 2960 switch

    We are having a latency problem with a Cisco 2960 switch. The switch is installed in our Desktop support area and is used to download images to new laptops. The imaging took around 12 minutes using the old equipment. Now the support guys say the image downloads take about twice as long-24...
  5. moonpie0

    Upgrading BD 6808 from G8Xi to G16Xi

    Cut went well no problems upgrading the card.
  6. moonpie0

    Upgrading BD 6808 from G8Xi to G16Xi

    We need additional fiber ports on a BD6808-no available ports & all slots are full. In order to provide additional fiber ports a G8Xi module is being changed out to a G16Xi module. The BD is running code 7.4.4.9. I am new to working on the BD switches and had two questions. 1. Is the...

Part and Inventory Search

Back
Top