I have an IP Office 412 running the latest software from Avaya. I am not certain of how to program an SPA2002 that I have secured to work over ethernet with the system. I'd also like to get it to work over VPN as I have a few offices using the VPN phones to access the central office's phone...
Alright, I have the phones working well over the VPN, all but for one thing. When you dial an external number or receive an external call the phones work well. However, when you dial an internal extension you cannot hear the person on the other end, nor can they hear you. An IP route has been...
Yes, I am noticing that with the 318. Have you had good luck with the 114's at your sites? I am installing cisco 1841's for some criticial sites, but may still want to use Netgear's stuff for some less critical ones if the 114 works well.
Dylan
Yes - I have just realized that the h323 filtering was my issue. Though I am still using the netgear hardware. This hardware isn't the best, but it is up and working. With the Pix and the 1841 I should have a much more stable connection up and working. Thanks for your help.
Dylan Finch
If...
Well, I have followed the instructions exactly and still have the same scenario. A phone that logs in, but that cannot make calls and has no dialtone. I think that I will have to try other hardware. It's always fun diagnosing things like this.
If anyone has any other ideas then I would be much...
Essentially, my question is: will this realistically work with this hardware? Is it a question of configuration or capacity? I am going to deploy it with a CISCO 1841 and a PIX 506E in the actual site, but wanted to test it with this hardware first. Anyone have any experience doing this with...
The system has VCMs and it works great with many phones in the local office. That is why I am saying the the phone acts like it has no VCMs. It registers and logs in, but you cannot dial and have no dial tone once logged in. I am using a FVS124g and a FVS318. They both have the latest firmware...
I have setup a VPN between two offices using netgear equipment in order to see if I can get a couple of 4620 IP phones to receive calls directed to them and dial other extensions. If I have the phone logging in, but am unable to make calls what is the likely cause? The phone actually acts like...
I see - that would make sense based on what I know of that firmware. If I have the phone logging in, but am unable to make calls what is the likely cause? The phone actually acts like one does when there are no VCM's on the IP office unit. The system that I am connecting to works well and the...
Where're there detailed instructions on how to upgrade a 4620 with normal firmware to a 4620 vpnremote firmware. I have my VPN configured with netgear hardware and to the point where the phone logs in, but has no voice. This is undoubtedly due to the fact that I do not have the VPN firmware...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.