Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. jaja2468

    Unable to Use Remote-Access

    Attempting to use remote-access to deactivate call forward on a station. I have enabled the remote-access, assigned a DID, Authorization Code Required to Yes, Remote Dial Tone to Yes, barrier code, COS for console permission, COR of the station I need to deactivate. I dial the remote access...
  2. jaja2468

    Redial 1+ from M3903/M3904 Call log

    The redial from the call log will only dial the first 7 digits of a long distance 10-digit number. What needs to be programmed for the call log to recognize the 10-digit number as long distance and add 1+ to the front of it during redial?
  3. jaja2468

    Listen Only Mailbox for ESNA

    Thank you. That works.
  4. jaja2468

    Listen Only Mailbox for ESNA

    A customer would like a listen only or bulletin type voicemailbox on an ESNA system, no ability to leave messages by callers. Is this able to be done? I was thinking configuring a feature group would be the way to go but not sure.
  5. jaja2468

    ESNA Capacity License

    Looking for info on how many voicemailboxes are available on the ESNA system. Where is the licensing stored on the server to identify this number?
  6. jaja2468

    Add call appearance with no station

    Yes, that's what I'm looking to do.
  7. jaja2468

    Add call appearance with no station

    I want to add a call appearance to an extension, but the call appearance is not assigned to a station. The DN would only appear on the extension and not have a physical station of its own. Is this possible?
  8. jaja2468

    Menu mailbox

    Thanks Ken. Is that similar to Application Builder in that it is additional software that has to be installed?
  9. jaja2468

    Menu mailbox

    Octel calls it Enhanced Call Processing (ECP). Call Pilot uses Application builder. What does Modular Messaging use to create a menu type mailbox where callers press a key to be directed to a certain extension.
  10. jaja2468

    Unable to conference CUCM 9.1

    The ability to conference has recently stopped working. Pressing the conf key on an active call draws dialtone and places a call to the next party, but pressing conf key again drops the first caller instead of joining the parties. There are 4 conference bridges assigned, 2 IOS Enhanced CFB...
  11. jaja2468

    Call forwarding treatment CM5.2

    Have an issue with a user that manually call forwards their number to another internal number. The transfer takes place, but forwarding is never invoked at the forwarded to DN. I have set "cvg after fowarding" to Yes on the forwarded to DN and no change. Is there something else to look at?
  12. jaja2468

    UNIStimV on Rls 5.5 for CS1000

    We have a CS1000 that is at Rls. 5.5. The FW for the 1120/1140 IP sets that are loaded on the Sig Server is C4I. There are a number of IP sets that have been deployed that have newer FW versions installed. The highest being C7M for 1120/1140 sets. The UNIStimV is something I am unfamiliar with...
  13. jaja2468

    Caller ID ( 2 part question)

    GHTROUT, let's say I go the PVR route. My trunks are PRI. Can you provide the steps to cross connect the analog TN to a trunk port and the trunk TN to a PVR route?
  14. jaja2468

    Caller ID ( 2 part question)

    Ok, I understand about the phantom. I was afraid it was gonna be something like that. The following is the CLS that is assigned to the station now. I set CNDD and am still getting caller ID. CLS CTD FBD WTA LPR MTD FNA HTA TDD HFA GRLD CRPD STSD MWA LMPN RMMD SMWD AAD IMD XHD IRA NID...
  15. jaja2468

    Caller ID ( 2 part question)

    A phone set with caller ID will have an appearance of another DN that the customer does not want incoming caller ID to display. This appearance will not have a TN assigned. Is it possible to not display incoming caller ID on an appearance with no TN? Or will I need to assign a phantom TN...
  16. jaja2468

    Element Manager IP address

    Got it, thanks for the help
  17. jaja2468

    Element Manager IP address

    I do not know the ip address of element manager for the CS1000. We typically use telephony manager or the command line to interface the PBX. How can I go about determining what the address is?
  18. jaja2468

    how to set time on cs1000 rls 6

    I also have rls 6.0 and need to change the time. I followed the process here and went to the UCM. I then access Tools/Date and Time. That opens up base manager. It shows me the current System Date & Time. I choose edit, which opens another screen where I change the time to what I want. However...
  19. jaja2468

    Notify Me to Numeric Pager

    We have a resoultion to our issue. It appears there was no dialing plan built in our session manager. Thank you for all the replies.
  20. jaja2468

    Notify Me to Numeric Pager

    Sorry for not responding sooner. If an internal PBX number is used for the Pager, MM does dial that number and I can hear the digits. Also did a list trace on the trunk grp for MM and got the following error when an external pager nnumber was provisioned. SIP>SIP/2.0 404 Not Found So I am...

Part and Inventory Search

Back
Top