Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
advise on Policing
Hi Kevin Policing is only gonna "drop or mark for potential to drop" packets and should only be applied to outgoing packets with traffic-shaping. You should be looking at appying "class-based queuing", this can allow you to give http traffic a certain amount of BW You can have a look at how... -
Cisco ASA/PIX RAS VPN Question
Hi Steven You need to configure a vpn group for the remote users, the vpn group has to reference a local pool of address and config NAT 0 on the group to. If you want the remote users to have internet broweding access whilst connect into the vpn you need to enable split tunneling. Below is a... -
OSPF Config issues
Sorry m8 the statement that I advised should go on the interface and not in the ospf process, please give it a try to see how you get on. ip ospf network point-to-multipoint -
OSPF Config issues
The error that you see below is because the ospf process is not complete: OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint networks OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint networks OSPF: Neighbor command is allowed only on NBMA and...
