Is it possible to set up my DHCP server to ignore a specific vendor class?
I set up the vendor class on the DHCP server. Now I want to be able to tell it to ignore that vendor class so that this DHCP server will not hand out IP addresses to these devices.
Do you use WINS in your network? Check the two PCs WINS settings. I think maybe the one that shows the blank screen might be missing its WINS settings or they might not be configured correctly.
Also, the obvious test here would be to do an
ipconfig /release
ipconfig /renew
once you are cut over. This way you can verify the workstation is indeed picking up an IP address from the new DHCP server.
Also, if this new DHCP server in a different network segment then you'll want to look into...
I have a test domain environment that was set up to mimic production. On this test environment I have two domain controllers in my child domain and two in the parent. When I do an nslookup on the child domain I see the two DNS servers that are currently there, but I also see the DCs that were...
I have an IBM 5100 series server that I want to expand
the hard drive capacity of. The C drive has two 9GB hard drives in a RAID 1 configuration. The D drive has three 9GB drives in a RAID 5 configuration. Then there is one 9GB drive that is a hot spare (so six 9GB drives in all).
I want to...
Where can I obtain technical papers in regards to SEP 11
deployment? I want to install/configure a server and start migrating my clients to it.
Can someone please point me in the right direction ?
I should have mentioned that I want to be able to do that
in addition to what I already have. So I am sorting
and showing all weeks (by weekending date) where MTD_PERC => .15
Here is my query:
SELECT
b.wkend, round(sum([a.HC_GO]+[a.HP_GO]+[a.AX_GO]+[a.DI_GO]+[a.MV_GO]+[a.CH_GO]+[a.Or_GO])/sum([a.HC_GT]+[a.HP_GT]+[a.AX_GT]+[a.DI_GT]+[a.MV_GT]+[a.CH_GT]+[a.Or_GT])*100,2) AS MTD_PERC
FROM WkTotOff AS a, tblCalendar454 AS b
WHERE a.TDate between b.WkStart and b.Wkend...
I should be a little more specific....
For each month of the year, I want to be able to query data on a weekly basis based off the data I gave above. So I may want to get the totals for week 1, week 2, and so on.
I have a table that holds daily data. There is a column in there I named TDate which holds the date value in the format ##/##/##. I want to query weekly data. What is the best way of doing this?
My bad... let me re-phrase this question. Is there a way, using a batch script to gather from a client PC running SAV, the last time it ran a virus scan and the scheduled scan time?
What I would like to do is have a script that runs when the person boots up their PC that would basically look to...
Is there a file that SAV stores on a PC showing the definition date? I know on the server it's the definfo.dat file. Is there one of these or something similar on the client PC?
Is there a way to set it from the System Center Console so that it will scan the computer if it missed.
Example - My scheduled scan is set to run at 12:00am, but let's say that at 12:00am, my PC is turned off, thus missing the scan. The next time I turn on my PC it will not scan the computer...
I work for a company where the majority of people work an 8 - 5 sort of shift.
I run a SAV server and have it set up so that most people's scan runs around 4:00pm. People are saying to me that this slows there PC down a lot during the day, prompting management to want the scan times changed...
When I log into VPN I am able to ping all kinds of PCs and servers on the network except for one (which I need to get to).
Another guy that works with me is able to ping it from VPN whether he's logged in as himself or as me.
I am attempting the ping by IP address.
Any ideas as to what would be...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.