Search results for query: *

Hello Everyone Minue you are right I gave up, is taking too long.

Hello Minue The cable modem is " Linksys EtherFast Cable Modem with USB & Ethernet Connections" and model # is BEFCMU10 Ver2. It does not seem I be able to configure the LAN interface. I can log into the wireless router and do configurations. Thanks for your time newkid123

Hi Minue No still not working

Brent here is the result from sh ip address dhcp pixfirewall# sh ip address dhcp Usage: [no] ip address <if_name> <ip_address> [<mask>] [no] ip address <if_name> <ip_address> <mask> pppoe [setroute] [no] ip address <if_name> dhcp [setroute] [retry <retry_cnt>] [no] ip...

Brent Here is the updated sh route: pixfirewall# sh route outside 0.0.0.0 0.0.0.0 68.48.48.1 1 OTHER static inside 192.168.233.0 255.255.255.0 192.168.233.1 1 CONNECT static I disabled windows and norton firewalls and PC did get its IP address from pix and they were able to...

Hi Interfaces are up now, but unable to ping from PC to pix or from pix to pc. Same issue on PC, can not ping outside. here is the config: pixfirewall# sh run : Saved : PIX Version 6.3(4) interface ethernet0 auto interface...

Brent here is a copy of config: pixfirewall# sh config : Saved : Written by enable_15 at 20:01:09.519 UTC Tue Jan 30 2007 PIX Version 6.3(4) interface ethernet0 auto shutdown...

Brent FYI I just configured pix the way you said and it was total disaster, keyboard and mouse were not working and the PC was not getting IP address from PIX.

Brent is there a fast way of clearing the pix config?

Brent so for phase1 I do not use my linksys wireless router at all, right?

Hello Guys I think we have to go back to basics, something is not right, here is the latest update: ix101# sh route outside 0.0.0.0 0.0.0.0 68.48.48.1 1 OTHER static inside 192.168.233.0 255.255.255.0...

here is my config: pix101# show run : Saved : PIX Version 6.3(4)nside secu interface ethernet0 autop protoco D interface ethernet1 auto pix101(conf nameif ethernet0 outside security0te nameif ethernet1...

Hello NetworkGhost & SuperGrrover Here are more info: pix101# sh int e0 interface ethernet0 "outside" is up, line protocol is down Hardware is i82559 ethernet, address is 0013.80b7.4510 MTU 1500 bytes, BW 10000 Kbit half duplex 0 packets input, 0 bytes, 0 no buffer Received...

can anybody help me on this? I am still unable to access Internet from PC. Thanks

I followed your instructions, and somehow is not working. Still I am unable to access Internet from PCs, now I got this error on the pix: dhcp failed to add default route entry, allocated IP address:68.48.59.241 netmask:255.255.248.0 gateway:68.48.56.1

what do you mean by: cable modem --> e0 PIX --> INSIDE NETWORK here is the current cable installation: cable modem ----> pix e0 pix e1 ----> switch switch ----> linksys wireless router two PCs ----> switch

Comcast, is my ISP and they do not provide static IP address to residential customers.

Brent Here is the update: From pix : I can ping 68.48.50.237 I can not ping 68.48.48.1 I can not ping my PC 192.168.233.10. From PC: I can ping pix 192.168.233.1 I can not ping 68.48.50.237 I can not ping 68.48.48.1 Therefore I can not access Internet from any PCs, they do get the IP address...

Here is the config screen for the wireless router: Lan IP address Device IP Address: Subnet Mask: Wan Connection Type: Static IP Wan IP: Subnet Mask: Default Gateway Address: DNS(required):1. 2. 3. For device IP address I put 192.168.250.0 For subnet 255.255.255.0...

PCs are now connected to the switch. This is the IP address they get: PC1: 192.168.233.100 PC2: 192.168.233.101 From pix I can ping Internet at 68.48.50.237 from PC to pix, I can not ping. from pix to PC I can not ping. However I have no access to Inrernet from any PCs.