Search results for query: *

Yep. I assumed the issue was because it was only 10/100 and not gigabit but wasn't sure. I did however configure LAG ports thinking bundling 2 ports on both the ASA and switch would give me 200mbps but I still only got 100mbps throughput. I'll have to test with a gig switch.

I'd have to check but I know for a fact that all but the last 2 ports are 10/100. Last 2 are for gbic that can support 10/100/1000.

I upgraded my cable connection to 200mbps. I have an ASA5506x with a 3550 switch. When I connect a PC or laptop direct to an ASA port I get full 200mbps. But when I connect to one of the ports on the 3550 may speed gets reduced to only 100mbps. I tried changing the speed/duplex with no luck. Has...

Just wanted to report back. The issue was this, after removing it worked: group-policy DfltGrpPolicy attributes banner value Access Denied vpn-access-hours value Restricted

I have set this up in a lab and it worked fine but can't seem to get it working in a production ASA. Only difference is that in the production ASA they are using ldap. He is my scrubbed config and the screen shot of the windows error. Fernley-ASA(config)# sho run : Saved : ASA Version 8.0(4) ...

Understood. Thx

I have configured failover using the management port. When I unplug the LAN interface the Primary goes into standby and the stanby unit goes into Primary state. But when I plug the LAN interface on ASA1 back the Secondary stays as Active UNLESS I unplug the LAN interface o the Secondary unit. Is...

I have a WAN router with multiple WAN IP subnets. It connects to a L2 switch. Can I configure the ASA 5515x with one of the WAN IP's and still configure inbound traffic for one of the other WAN IP's assigned on the router?

Is it possible to create a secondary IP on an interface similar to that of a Cisco router/switch?

I have a customer that has an IP PBX (Site A) with a remote site (Site B) with IP phones registering to Site A. They have an MPLS network. I configured GRE tunnels on the Cisco routers for the Multicast traffic. The paging is working but the conferencing is partially working. When Site A tries...

Disregard I got it working. Forgot to add the Allowed vlans on the trunk.DUH!

I have a Cisco RV110W & an SF300-08. I have been trying to configure a trunk between the 2 and I'm starting to think that the RV110W cannot do it. I tired configuring port one and tagged and untagged & configure the ports on the switch to the specific vlan's I want but can't seem to pass both...

Can someone please explain the licensing for this feature? I want to be able to use the AnyConnect client on 25-30 PC's. I'm using an ASA 5505 with SEC Plus. Thx

Thanks curlycord but they are not using AMIS. UM was working fine when the exchange server was onsite. The error does not explain what exact protocol. I tried doing a google search but it did not return any helpful results.

I have a customer that was using CallPilot UM Messaging and was forwarding the VM's to a local Exchange server. They moved the server to a cloud based solution. We adjusted the Call Pilot settings but the VM's do not get forwarded. They have to use the DNS name of the cloud server because the IP...

That is what they are looking to do. Open Network Neighborhood and see devices when connected via vpn client. They have a wins server. They stated that on the previous firewall it worked.

I have an customer with an ASA5505 with VPN Client connections. They are stating that when the clients connect they can access the resources on the network but they cannot browse the network (see the actual devices). Is this supported or is there some config that need to be added to the group...

Current configuration : 8590 bytes ! version 12.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname ! boot-start-marker boot-end-marker ! enable secret 5 enable password 7 ! username admin password 7 ! ! aaa...

Thanks guys but I don't think either suggestion applies to my design. Thanks again.

If I create a another subint instead of secondary IP then I will have to create the vlan in the switch. I don't think that is the problem (if any) though.