Search results for query: *

Thank´s for the help. It worked well. Thank´s a lot!

Hello, I have a Laptop with a strange problem, I can´t get IE to display pages (It gives me the DNS error) and messenger to connect; but the system can perform the automatic updates and I can ping www.yahoo.com succesfully. I checked the Explorer options and put that detecs the connection...

Well back to basics... Sorry for the big delay... I was checking a few thing learned here with the guys on Manhattan They told me that the MotherBoard has to have the ability to boot from SCSI. So I whent to check that on my motherboard... something funny, I don`t have the SCSI option on the...

To attrofy -> No in fact that´s were i´m stuck after all this help (thaks everyone!!) I went to the card bios and disabled it´s scan option so I can pass to the installation screens and try the F6 option, well there I have to have a "txtsetup.oem" file wich I don´t have and can´t find it on the...

Hello... I used the diskmgmt.msc tool and partitioned and formated the SCSI drive. Using the IDE drive to boot and with all this changes I can see and use my SCSI drive now on windows. Tried booting with the scsi (detached the IDE drive power cord) drive with this new changes but with no luck.

Yes I will try dislmgmt.msc... but now im booting from the IDE wich is not mine... How can I make the SCSI drive to boot. It seems to work OK (The SCSI drive) but when it comes to boot the problems begin... I thought it was the drive that was making all the problems but is working OK.

Hello... I borrowed an IDE hard drive an installed it on the PC (Now I have one IDE hard drive, wich is working, and one SCSI hard drive, not working at all) Well as I tried to boot from the IDE drive the were a lot of frezzes... to correct this I had to shoutdown the SCSI boot options, so that...

I played around with the BIOS of the card and check for error and made a low-level format to the disk from the card (This are the only tools that the card has). I haven`t found info of the drive because is to old. But the problem is still there...

The DVD is my only device connected to the IDE Channel, then the Hard Drive is the only SCSI device connected to the Card. Now the DVD is set to primary Master, I updated the BIOS of my mother board and checked if that was the problem, but sadly it wasn´t. *** From smash *** Does the machine...

Hello... Ed, I've changed the cable to the configuration you told me, but nothing the same boot error. I checked the card and is set to automatic termination, but.... I don't know how to check that on the drive... it only has one jumper and its covered. Its a Compaq Wide ULTRAS SCSI...

OK, im going to change the order the cable is connected to the devices... as edfair said... (Usual is termination, drive, card) But for you to have a better picture of the cable... The cable has 4 connections, two are very close (#1 and #2), one is in the midle (#3) and the last one is at the...

Well i think it is... one end has the termination thing, then is the SCSI PCI card connected and at the very last connection is the hard drive. In the midle there are a few connections with no devices.

Hello... I`m having trouble installing Windows XP Pro on my system, when booting with the cd it gives an error (CDBOOT: Cannot boot from CD - Code: 4). I have a PCI SCSI contorller card and a 32 gb drive (SCSI too) in where i whanr the system to be but i can`t install it. One funny thing is that...