Search results for query: *

Hi everyone. Apparently the latest release for the ERS2500 includes a DHCP server. There is already documentation on how to configure it etc. Here's the scenario. I have a branch office where we're going to deploy VoIP - new PBX (Avaya CS1000 of course ), cabling, network, the works. Part of...

The switch does pass traffic once you start the agent code. I'm wondering if it has anything to do with the cascade module. But since with the 470's they are built-in, there's no way to remove them to test that theory.

Hi all. We have a problem with a couple of ES 470 -48 pwr switches. They sometimes display the following error on startup: Test 212 NSXs Internal Loopback - FAILED NSXs ILB NSX: 16. Rx Failed: Mode=5 Octets Wrong: Sb=1108. Is=0. When this happens the boot process stops and the...

I tried another switch and same result. I realise that it's not that the switch is losing the config, but the management IP stops functioning. If I configure the switch and keep VLAN 1 as the management VLAN, I could reset the switch with no problem. However, I start running into problems if I...

Thanks HungryHouse. I'll try another unit. Wouldn't it be ironic if the very first BES50 switch I use was defective. If I have the same problem with another switch then I know it has to be something I'm doing wrong. I'll let you know.

Hi folks. I've just started using the Nortel BES50 for the first time. After several tries, I got the box configured how I want it - nothing fancy, just 1 VLAN. The problem is, the switch works fine until I power cycle it. After that the configuration disappears. Even the default IP no longer...

Hi all. We have a group of users who "claim" that the performance of their applications is not what it should be. Here is the situation: These users are geologists and use applications such as Landmark - very graphical etc. Their machines are connected to the network through i2002 ph 2...

Hi all. How do I program the 8600 (Rel. 3.7.3) to block traffic to port 445? I know this port can be exploited by hackers. There seems to be a DoS type behaviour occuring on our network where many clients are sending traffic on this port. I'm new to ACL's and I know they can be tricky. Thanks.

Thanks for the info. I'll certainly look into it some more.

Hi all. Does anyone have experience with Nortel's WLAN 2300 series? I just wanted to know the good/bad and how it compares (if that is possible) to Cisco. I'm thinking about deploying 2332's and the WSS 2361.

To answer curtismo, the switches were upgraded out of the box before any configuration changes were made.

Thanks. I'll try that. Is this particular problem common? I've had 2 switches fail for the same reason. The interesting thing is that both were set as the base unit in their respective stacks and both had the 2-port GBIC MDAs. The stacks in question are in separate buildings. Coincidence?

Thanks for the info. It gives me something to work with. If the links have different characteristics, would it make sense to use the Alteon for load balancing? With regards to the 8668 Metro card, I've been reading some stuff on the Nortel site and I get the impression that this is really...

Hi. If I have 2 links between my sites, 1 Metro Ethernet and the other a broadband solution from my cable TV provider, how can I use the 8600 to load balance these 2 links. Both links terminate with an RJ45 connector. The links are not Internet links. For the Metro Ethernet connection, do I...

Hi. I have 2 BS460's that have frozen on bootup at the same point when the console reads "Completing Initialization". All lights in front remain lit and orange. Here's a print screen. 460-24T-PWR Diagnostics 3.6.0.1 Testing main memory - PASSED Resets: 30. Initializing Flash.. Reading MAC...

Hi all. I've seen this happen on 2 different stacks of BS460s. I have web/telnet passwords set on these stacks and changed them from the default "secure". However, on these 2 stacks I've seen the password get corrupted over time. When I connect using the console cable you actually see garbage...

I'm looking to purchase the software but I just wanted a little more technical info than the presales stuff. All the docs with the info I'm looking for is restricted on Nortel's web site. For example, does the enterprise version support the Passport 6400's? Are there modules that can be added...

Thanks Anthony. Try telling a DBA that their database is poorly designed! :-) The 2 networks are linked via a 1Gbps FO link between the 8600 and an Accelar (They are physically located next to each other). As for other apps? File sharing is ligthning fast between networks. I haven't heard any...

Hi. Here is the problem. Our existing LAN is flat - one IP subnet, with over 1000 nodes. There are Accelars at the core but the PCs connect via 10BaseT hubs. We are in the process of upgrading to a segmented network using 8600's and switches (100Mbps) for clients. This new net is connected to...

Hi all. Does anyone have experience with Nortel's Enterprise Network Management software (ENMS)? I'm also looking for documentation. The docs on Nortel's site is restricted so I'm unable to find out more about the product. Any insights you may have would be appreciated. Thanks.