Search results for query: *

Would the BCM need to be re-started if the DHCP IP address range is reduced or expanded. Thanks

How to configure voicemail for a private DN. pbx-:CS1000 5.0 voicemail: CallPilot 600r

Good Day, I am remotely trying to telnet to a MICA card and I don't know what the user name and password is. I am not seeing it in any of the docs. Accessing the card via the web interface is not working. Any help would be appreciated. Thanks

I am in the Caribbean- Trinidad and Tobago. I would look at cdb programming.

Thanks for the info from the posts. I am using MICA for the auto-attendant,the users would get the recording and enter the ACDN # to be routed. I have only LOOP trunks to use , it can't be changed to GND.

These are the Config's TYPE ACD CUST 0 ACDN 3800 MWC NO DSAC NO MAXP 1 SDNB NO BSCW NO ISAP YES VSID AACQ NO RGAI NO ACAA NO FRRT SRRT NRRT FROA NO CALP POS ICDD NO NCFW 7021 FNCF NO CWTT NONE HMSB YES ACPQ NO FORC NO RTQT 0 SPCP NO OBTN NO RAO NO CWTH 1...

I am trying to configure incoming auto attendant calls via PRI trunks to hit a ACD configured to be call forwarded(ncfw)to a specific access route which would then be used to access an analog trunk group for making international calls. The problem exists when the route is accessed by users they...

I would like to change the default "rwa" admin password and create new user accounts with the same "rwa" access. Thanks for any assistance

I believe the HDD is working because the extns have dial tone and they have 9 access. The IP trunks and the web access is not working.

Thanks for the correction,it is a 200. Yes..the lights are flashing at the front of the unit. I checked but they are no leaking capacitors.

I have powered off the box and reset the cpu card but the problem still persist.

Good Day, After a loss of power, the BCM 50 is unable to accessed via the web interface, the IP trunks are not working but users are able to dial 9 and make outside calls. Attempts to connects to the BCM via the console port are not working, I am using Hyperterminal 9600,n,8,1. What could be...

Hi, I need some help.Working on an Opt61 running Succession 4. I am trying to configure a PRI without configuring a D Channel.I want to use all 24 channels to connect to a third party VoIP Gateway to allow us to dial out via the internet using the channels of the PRI I have configured the route...

An admin user in error disabled the admin password. Is there any way to re-enable/reset without losing the configuration. Any assistance would be helpful. Super User accts cannot reset the admin password

How do I allow a Nortel Option 11 to be accessed via telnet. I am trying to run Order Pro via telnet

Hello, I am trying to install a patch but the script (MDCS INSTALL F0) I am using in LD 143 gives me a invalid command err. What is the correct script to use for REL 4,as the script works for Rel 3.