Search results for query: *

hi every body i have two routers, between them there is a ipsec vpn, i want to set up qos to give priority to http, but how to set it up on the interface that create vpn since http is encapsulated in the vpn. if you have any example share it with me thanks a lot and thank you tektips

hi everybody i want to setup a netflow server, but i want to know if it is possible to filter my statistics i have some vlans but i want statistics on only one of them how can i setup my router so it sends me only statistics about this vlan and only this on. thanks for reading and answering

hi everybody i have configured my router to nat overload trafic to access internet and static nat for my vpn tunnel because the vpn is created by an ASA dehind the router the problem is i cannot ping the other side of the link and even my owne interface. but as soon as i remove this line ip nat...

this is a sample of a configuration i have made and working well, but i really didn't understand the topology of your network so i did as i could. ----------------------------------- mpls traffic-eng tunnels ! ! interface Loopback0 ip address 9.9.9.1 255.255.255.255 ! interface Tunnel1 ip...

hi everybody I want deploy mpls traffic engineering in my network but I have a cisco 1841 routers and I don't know if they are able to preform it. Can any body help by giving me an answer or a link . Thanks

hi everybody i have a router to access internet, the problem is whene i configure the overload nat on the outside interface i cannot access the the router from the outside using telnet and http , whene i remove the nat telnet and http works fine. there is no access-list to limit the management...

i tried again the script in the : http://www.hauwaerts.be/2009/02/08/cisco-transfer-on-commit-eem-applet/ using GNS3 and a 7200 router ios C7200-ADVENTERPRISEK9-M), Version 12.4(22)T it works good, each time you exit the configuration mode a copy of the running config is sent to the tftp...

why don't you use a tool like Kiwi CatTools, or SolarWinds Cirrus Configuration Manager

i have found a TCL script to perfom this task on: http://www.hauwaerts.be/2009/02/08/cisco-transfer-on-commit-eem-applet/ but i could not make it work, i am not a expert with TCL scripting so if someone could help it would be nice

to remove the destination ip and file name prompts just this Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#file prompt quiet Router(config)#^Z

hi, this will give us a file named "router-confg" is there any manner to name it with a format dd-MM-yy-hh-mm.txt

here is the configuration if my client router, hope you will find it clear ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router-MC ! boot-start-marker boot system flash c3725-advsecurityk9-mz.124-25.bin...

the configuration of VpnRouter is same as the client's router , i replicate the configuration in GNS3 to see the behavior of the vpn

in the production network ther is no firewall, it's a flat network , the router is connected to layer 2 switch without any vlan

Sorry man I forgot to specify the role of each equipment: PC1 : is the mobile user using Cisco client VPN version 5.0.02.0090 PC2 : is acting as head quarter server ISPRouter : is there just to create a network separating PC1 and VpnRouter and to simulate the real situation VpnRouter...

i have some trouble with my vpn client configuration first the router is cisco 3725 with the ios c3725-advsecurityk9-mz.124-25.bin i made a test platform in GNS3 as follows using cisco SDM to perform the configuration as I did with my customer...

i am working on a hipath 4500 version 01 and i want to activate the accounting option on the trunks who to do because i will install a hipath Acounting manager

my system is a hipath 4500 version 01and i want to activate the accounting option on the trunks who to do

I want to activate the accounting option on the trunks who to do If you can help me, thanks a lot

Hi, I have a problem,I want to configure my HIPTH 4500 so It could be possible to me to log my self to any phone in my company and load my profile so that I can call with my own phone number and all my privileges , I know that is possible to be done using a code declared in WABE , but I don’t...