Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. mrphoneman

    bcm 50 first timer

    Everyone says element mgr is greater but they do not tell you that it's SLOW as HELL! I prefer to program throughthe phone and do only IT/IP pgmn'g with the pc. To get into BCM50 from a 7316e press ftr **266344-737662 OK 266344 and your @ your terminal & sets. Good luck!! DO a regular startup...
  2. mrphoneman

    BCM crashes a few times a month

    What version of BCM are you running? I know you say 3.7 but was this an upgraded machine? 3.0 to 3.5 to 3.6-7 may be your troubke as all 3.0 to 3.5 have a service advisory on them for the BFT and MSC boards. Back it up now while you still can and write down the SYS ID as you will need that to...
  3. mrphoneman

    long distance access codes

    This can only and truly be accomplished through the CO or from your carrier. They can force account codes for LD and will appear on your Telephone bill. Good luck.
  4. mrphoneman

    Dead Phone

    change your port to a different DN and then do a swap on the DN from old to new!
  5. mrphoneman

    Incoming Call Handling

    You need to setup call center to make all of this to happen. Have one on ebay for less than 1/2 the going rate if your interested?
  6. mrphoneman

    BCM400 ver 3.6 login

    had same trouble on a 3.6 and after upgrading JAVA it worked just fine.
  7. mrphoneman

    BCM

    on the BCM itself under documentation
  8. mrphoneman

    BCM50 Phones Not Ringing

    Have you loaded the BCM50.039 DSP-FPGA patch
  9. mrphoneman

    Trying to do a F986 using VPIM

    I don't think this is possible as you are not part of the actual system needing the transfer. You are only able to call back and forth and make a physical line tranfers. IP telephony allows this. Good luck
  10. mrphoneman

    BCM DOWN!!!!!

    I See a lot of BFT in this but I haven't seen any MSC. If your MSC is not strapped it will crash your system and is not recoverable. This happens with old version 3.0 and was carried onto 3.0 to 3.5 upgrades. I have swapped many a BFT & MSC which both have Nortel service advisory. Good luck!

Part and Inventory Search

Back
Top