Search results for query: *

Hi, Thanks. Can i forward this to a Fax server over IP? Would this require a CM as well? What would you recommend?

Hi, It's one in a range of numbers in our E1. Is it possible to install a fax module and connect the fax machine direct to the router? This is my current hardware vg#sho inv NAME: "2811 chassis", DESCR: "2811 chassis" PID: CISCO2811 , VID: V05 , SN: FCZ122870Q4 NAME: "One port E1 voice...

Hi, That is correct. It's not connected to the system, its a different number and line. Can you please confirm if this will work for me? https://community.cisco.com/t5/ip-telephony-and-phones/forward-incoming-calls-on-specific-e1-number-to-external-mobile/td-p/3833787

Thanks gnr, Which IP should i use for the session target IP? I want to forward a call incoming on 3001 back out the PRI to another analog fax. Thanks.

Hi, I have uploaded the config here. Sorry for the delay, we were considering alternate methods, that we've dropped now. Appreciate your help. https://files.engineering.com/getfile.aspx?folder=87c49e55-e8d2-449d-a440-c4ca64700886&file=AUH_VG.txt

Hi, Thank you for the comment. I believe it is h323, but how would i know for sure? How can i configure the dial peers, can you help me? Can i post the config here? Thanks.

Hi, I have a Cisco 2800 that was a gateway to our Cisco UCM. We have shutdown the CUCM, and moved to another voice system. However, the gateway is still active, and I had a few queries. I need to redirect an incoming fax call to another separate analog number? How can I do this on the gateway...

Hi, We've been provided a SIP trunk with a modem at one of our offices. I only need to use one of the ten numbers provided to us (dial-in conferencing). The office does not have a PBX. 1. What are the options available for me to use that trunk? 2. As we're just looking to use a single number...

Hi Curly, Thanks, it was a greeting on the reception extension. I've asked them to re-record as required. Thank you.

Sorry, my mistake, calling the extension directly also, goes to the greeting if unanswered that i want removed. We have two ranges of extensioin, 1xxx, and 2xxx. External callers: (scenario 1): • When a caller, dials a direct line of an employee; if the call is not answered, the caller is given...

Hi curly, When i try F983, from my softphone, i get Log: and if i enter 1000 here, i get a prompt for the password. is this the general maibox? can i reset this from the call pilot manager? what would the default password be after reset? I can see under the callpilot mailbox administration that...

Thanks Curly, I've logged into the reception extension mailbox, but there are no recording's under primary and internal greetings.

Hi, We have a BCM 350 with call pilot. Calls to our pilot number, hit the auto-attendant and after the greetings, when we dial 0 for operator, it rings at the reception. if the receptionist does not answer in 4 rings a greeting is played. we want to change this greeting, and i cannot find the...