Search results for query: *

I have an eMG80 with 4 analogue ports connected to a Grandstream ATA HT814 with 4 sip trunks configured . When I ring into the system on any line I get a loud burst of tone after every minute of the conversation. Has any one experienced this before. I have turned OFF the Call Duration warning...

Hi Guy's, I'm new to the Avaya. I was given one of these box's and have finally decided to look at it. Is there anyway you can log in using the RS232 port and default the usernames & password. I have managed to use the RS232 port to login and change the ip address but I can't get out of debug...

G'day Guy's, I have an NEC TOPAZ with 3 analogue trunk ports. We then had to install an analogue telephone adapter in between the customers computer network & the TOPAZ. The calling line identification was working before the ATA device was added but not after it was installed. The ATA is a...

G'day Fellas, I have been pulling out my hair over this I have set up a delayed VRS / DISA on an SV9100 and an SV8100. Hope you can help. I have it ringing in on IRG 1 for 10 seconds. VRS message 1 kicks in & if I dial 8 it goes to a voicemail box, if I dial nothing it rings IRG 1 for 20...

I'm trying to login to an IPS using MatWorx ver 13 over IP. I have my laptop set to get it's IP address form the DHCP server. It is plugged into the same switch as the PABX, and I can ping the PABX. I got the IP address using 0A00 00 , but when I use the wizard it asks me for the port number...

thanks cwc3 but it happens with internal extension to extension calls as well as trunks. The trunk line do vary. I was thinking that it maybe related to the backplane in the first cabinet however.

Hi all,I have a very frustrating problem with an Ericsson BP 250 2 cabinet, rel 9 PABX.In the middle of any call the system will intermittently place the called party on hold and they will hear the MOH message. It appears to only occur with cabinet 2 extensions, these extensions are all analog...

Hi cwc3 are you looking to extend the ethernet via a tut modem system or us a dslam to bridge the existing internet connection? I know of someone whom maybe able to assist with TUT devices and you can pick up a dslam from netcomm.

Hi all, I have a very frustrating problem with an Ericsson BP 250 2 cabinet, rel 9 PABX. In the middle of any call the system will intermittently place the called party on hold and they will hear the MOH message. It appears to only occur with cabinet 2 extensions, these extensions are all...

Can anyone tell how to use Calling Party Control. I'm having call lock-up problems and was told that I needed to use CPC but I was not told how it works or what I do. I have a KX-TD816,with a PSTN trunk line connected to line circuit 1 on the system on trunk circuit 6 I have a GSM FCT unit. What...