Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. nemsisuk1

    Compaq ML330 replacement DAT Drive not recognised

    Yep powered down the server and re booted with the SCSI lead disconnected DAT seems to work fine.. no problems. As for a terminating resistor... no i did not remove anything when it went away for repair. SO therefore must be SCSI id, As a last resort, i have similar server with same dat...
  2. nemsisuk1

    Compaq ML330 replacement DAT Drive not recognised

    Thanks for the reponse, I assumed that the repaired drive SCSI id had not been changed, however, this may not be the case how can i check what the iD's are or if there is a conflict? The DAT unit does power up, but is giving an "error condition signal" on the front led's Thanks
  3. nemsisuk1

    Compaq ML330 replacement DAT Drive not recognised

    Hi Compaq ML330 G2 with 3x9GB harddrive Raid 5. Had a failure on the DAT drive 20/40GB, sent away for repair/replacement, when re installed the DAT drive the RAID/SCSI does not regonise it. ANy help would be appriciated, i was told that need to access the RAID Bios????? Thanks

Part and Inventory Search

Back
Top