Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. datscolor

    Swapping printheads and inks among Phaser models

    It wasn't theory. Until Xerox eliminated my position, I repaired Tektronix printers from their introduction. I understood you to have swapped an 840 printhead into an 8200 or an 850. I would be very curious how that was done. Great if it worked. As far as inks, we sold many printheads that...
  2. datscolor

    Phaser 8400 Fault Code 37,008.44:2169

    See if you can remove the waste tray. If not, there is ink build up that may restrict movement of the printhead. The other possibility is the cam shaft behind the maintenance roller has cracked pawls. This throws the maintenance roller out of position.
  3. datscolor

    850 says media JAM - but I cleared it-- HELP!

    If there was a sheet of paper wrapped around the preheater entry roller (below the chrome guide) and was removed by pulling, chances are the paper pass flag is dislodged or broken off. These are gravity held and paper pushes them up out of the interupter. If broken off, the printer still thinks...
  4. datscolor

    Swapping printheads and inks among Phaser models

    None of these models can swap printheads outside of their own nomenclature. The firmware will not handshake with the image processor. The inks between models are not compatible chemically. If mixed, they will coagulate and clog the jets.

Part and Inventory Search

Back
Top