Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Cisco Access list basic question on FTP..Urgent
You have defined your ACL in one direction only and your intention is to transfer data in both. -
10 vs 100 BaseT; bandwidth issue
What is the current bandwidth utilization on both the 100Mb/s segment and the 10Mb/s segments? If you are consistently lower than 40% (70% if it is token ring), you probably have little to gain from increasing the bandwidth. If your 10Mb/s segment(s) are saturated, ie. over 40% utilization...- rrobnett
- Post #2
- Forum: Compatible networking solutions
-
Connecting two cisco 2524 routers, what is needed?
If you buy another 2524 you will need a DCE serial cable and a DTE serial cable. If you get the V.35 cables, the cheapest I have seen them is about $80 each. Remember to set the clockrate on the DCE port. There is another alternative that does not require these cables. If you have already...
