Search results for query: *

I'm new to IP Office systems so please bear with me! I'm setting up an IP Office 500 (version 7.0) system for my church who currently has a Partner ACS R3.0 system. The reason for the upgrade is not because I feel like pulling my hair out but because we have another building that needs...

I ended up fixing the issue. It ended up being with the remote router. I guess I was too stubborn to even think the problem was on that end because it was working fine. Once I looked at the config, I relized I wasn't using a route-map I was just nat'ing with an access-list. Once I put a route...

Hi burtsbees, I block pings on the remote router via an ACL. Could this be the problem?

Hi burtsbees, I understand that. As I said, the remote router (the VPN server if you will) works fine as I can connect to it via VPN just fine when I put the client directly on the internet without the Cisco router on the client side. The reason I posted the router config of the router on the...

Hi unclerico, Here is the sanitized config of the router I'm trying to connect through...I haven't tried a crypto debug because I know it works when I put the client directly on the internet. That's why I think there is a problem with the config below. Thanks for your help! version 12.3...

Hi All - I am having a problem connecting to a VPN network with the Cisco VPN client through a Cisco router running NAT, IOS Firewall, and also DMVPN to another completely separate network. The client just sits there and says the remote VPN has stopped responding or something like that. If I...

The 3550 is providing the DHCP. The configs are in my original thread...

Yes, the PCs are on the same switch (the 3550). It always does seem to be the same ones. However, it seems to be IP address related. The ones it happens to have higher numbered DHCP leases. The ones that still work are lower. I can't really prove this though because if I static out the IP with a...

Thanks for the response, North323. My internet pipe is 20/5 so I have plenty of bandwidth. The VPN tunnel is only to my office. Internet traffic does not flow through it. I just confirmed that to be sure by going to whatismyip.com. I didn't get my office IP. I got a Verizon IP which is correct...

Hi Everyone, I have a problem that used to happen only occassionally that seems to be happening more often now. Whenver I download large files, I lose internet connectivity on a few machines. What is strange is don't lose connectivity on all machines. Just on a few of them. If I leave the...

OK, good that's what I thought. I tried applying some QoS (limiting the bandwidth port 445 for filesharing was taking) to the f0/1 port on the router that has the trunk sub-interfaces on it because I found out sub-interfaces only support some QoS features and applying it to the f0/1 port didn't...

Hi All - I have a network with 4 VLANs. The switch is a 2950 and the router is a 2621. The router is doing DHCP, NAT, firewall, inter-VLAN routing, and it's a dynamic VPN endpoint. Everything works fine. However, when I copy a very large ISO (gigs in size) across the network to a different...

Hi brianinms, I did allow directed-broadcasts on the tunnel. That's where I would that, correct? Thanks! Steve

Hi Burt, I added my other networks (5.x and 7.x) to ospf on my home router and voila! I can ping the other networks through my tunnel! Now if only I could browse via My Network Places. Any ideas on that? Thanks again for all your help on this! Steve

Hi Burt, Yes, I can reach all the vlans from the 10.0.0.0 network at my house. I will give your suggestions a go this coming week. As for NAT'ing through the tunnel, I don't believe I am. I have an access-list that stops the NAT process for 10.0.8.0 and 10.0.5.0 before it reaches the tunnel...

Hi All - I have a GRE tunnel between a 2621(non-xm) at my house and a 2621XM router at my office which is encrypted by IPSec. This all works great. Here is where it gets complicated. The 2621(non-xm) is at my house which is my firewall/NAT/VPN/inter-vlan router for 4 VLANs that are on a 2924xl...

Thanks guys, I thought there was no other method of doing this. I guess I will just have to live with the replication time. We have 3 DCs currently as we are in the middle of a 2000 to 2003 migration so eventually, 1 of the DCs will be going away. Hopefully the 2003 migration will speed up our...

Hi All - I'm pretty sure I can't do this, but I figured I'd ask anyway. When I re-image or replace a machine that is a domain member, I have to manually delete the machine from AD and wait for my DCs to replicate before I join the new machine. Otherwise, I get an error that says the machine...

tperri, thanks for your reply. Is it possible to assign the array values myString(0), myString(1) to variable names a little easier to remember? Thanks! Steve

Hello, I am coming back to VB after about 5 years of a break. I had gone off to learn PHP and forgot all of my VB in the process! I have been asked to design an application that will take a string of text separated by pipes like this: "String1|String2|String3|String4" from a device that serves...