Search results for query: *

The solution seems to be setting the following parameter on the DS1 page to 3.1kHz from voice. I will continue testing, but initial results look good DCP/Analog Bearer Capability: 3.1kHz

All companding modes are set to a-law, which I believe to be correct for the UK. I think the modem connections are good, they are all short (less than 3m from modem to switch) and besides, I have 6 analogue modems and 10 digital modems, all of which exhibit the same problems...

I have checked and the sync is set to the DS1, I have changed the sync to yes and will try the modem performance now.

I am struggling to connect any form of modem through my ProLogix switch. We moved to a new building about 2 years ago with a set of analogue modems that used to connect direct to Telco copper lines. These are now connected into an analogue card on the switch and the switch has a PRI line to the...

I have a Cisco 2611 connected to the BRI line on the Definity. I am based in the UK, so have Euro setup. Create a data module as follows: DATA MODULE Data Extension: 1130 Name: ISDN Support Line 1 Type: wcbri COS: 1...

The GNU compiler/linker warns about several potentially dangerous routines such as gets and tmpnam. These routines create buffer overrun vulnerability (as described previously) and should be avoided. Such errors can be used to compromise system security.

I think this will depend on what scanner you are using.

It depends on the printer you are using. Some specialist barcode label printers (e.g. Zebra models) have a fairly simple command language for formatting labels.

I am looking to create a LAN using Cisco Catalyst 2950C switches (with the 2 fibre uplink ports) and I was thinking of connecting all the switches in a ring to create a fault tolerant topology. I am not too fussed about most of the client connections, and the server and critical client...