When I call the pilot # it rings 4 times and says "that ext doesn't answer". If I call an extension it makes me put the ext in again when it covers. I can leave messages after I enter the xt again. I can also retrieve messages. What am I missing
Does anyone have a doc or send information on how to hookup the analog portion of the Intuity LX. I have the CLAN integration working but I don't know how to hook up the analog boards. How are the stations pinned out to the inutity from the analog board?
I'm doing video over TN556B with a Polycom. My out bound works great. I have 3 DID's for my 3 channels off of the 556B. When I try to dial to the camera I can't sync up. How can I make one number pull all three channels. Can I pull another DID to mesh all three DID channels?
Any help would...
The sites are connected via point to point T1 and DS1. So if I have IPSI's in the EPN the remote EPN will stay connected to the S8500 in ESS? I'm assume the TDM calls will drop on the remote EPN's when ESS takes over
I have a site that I will ESS off of a main site. I have two sites P2P off of the ESS as remote EPN's. If the connection to the main server goes down and the site goes into ESS will the EPN's stay up? I believe they will but I'm looking or the warm and fuzzy. Anyone doing this?
I just want to verify that all I need to EPN a G650 off a MCC is a TN573 and a TN571. The two building will have single mode fiber. Does anyone know the part that connects the fiber? DO I need any other boards in the G650 or MCC. I only going to have 3 analog boards in the G650, no phones...
phoneguy55 you've been a big help so far
Let me make sure I understand
The Blue pair go to pins 4 and 5? Which pins does the white blue go to and which does the Blue white go to? The same for the orange pair.
I using this on a VSX3000 with the 4 port BRI built into the unit.
Do you know...
sorry for the extra question but I can't get the video unit to come up. The BRI light on the VSX3000 doesn't light up and the BRI stays down on the camera. I have Polycom and Avaya onsite trying to figure it out. I figure I'd come back to the experts on Tek-Tips
I have the BRI board installed...
can you print out your config to your TN556? Also, how did you punch down the wire to the units. I used the following on one port
WB WB
BW BW
WO WG
OW GW
Any help would be apprec
Thanks for the information.
Just to make sure.. You have DID's for the video calls over PRI and they are being split off of the BRI card. Have you seen any issue doing it this way? Any problems trouble shooting video calls?
I have the QBRI module from Polycom on the video units. That...
One more thing
This is on a S8710 V3 and I want to have 4 seperate Video conference units with there own DID's for video confernce calls. it will connect to a Polycom VSX3000
Has anyone used a BRI TN556B for video. I have a PRI that I want to use for video. I know I can do it with an external CSU (Adtran 550) with BRI cards. Can the same thing be done with a PRI to DS-1 and broken out to this BRI card?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.