Search results for query: *

Dears Hi, I manage an OpenScape 4000 V6, The customer insists on setting up several SIP extensions in the 'team and top' group, so I manually made this available by following command lines: ADD-WABE:CD=9602,DAR=STN,CHECK=N; ADD-WABE:CD=9789,DAR=STN,CHECK=N; ADD-WABE:CD=9603,DAR=HUNT,CHECK=N...

Dears Hello I'm wondering if there is no document in Openscape 4000 V7 or earlier versions that guide me on how to configure CSTA Passive Call recording. I need to use CAP and CDR (Call Detail Recording) together to record some of the station's calls voice and data. Any help would be...

Dears Hello previously I used to download the installer iso file of Openscape 4000 V6 to V8 and in documents directory there was an ISO file with most of OS4K documents but in Version 10 there is no file in Documents in installer iso file and I cannot find the way to get that, what is the path...

Hi All I want to active camp on tone on internal and external calls on an Hipath 4000 V3 and I want to repeat this tone every 5 sec I tried: 1.camp on tone in ZAND Tones =6 or 7 2.Activate CW in Cossu But when a call receives for a busy extension I have visual alert on Display and there is no...

thread965-1716275 Dears Hello I have an Openscape 4000 with no AP shelf, and visibly no APE unit. but every some times on the System following error acours in the Dis-LOGBK. P10151 DEV:USER TSN:3120 UID:2 NOUN:SIPCO TYPE:START TIME:21-09-06 11:47:12 CHANGE-SIPCO:LSNET,,,,,,,,,,0.0.0.0...

thread965-1408129 Dears Hi I have an OS4K V7 and music on hold is not active I just tried: CHANGE-ZAND:TYPE=ALLDATA,HOLDTN=MUSIC,MELODY=1; and CHANGE-ZAND:TYPE=TONES,CP=MOH,SIU=1; but it is not beeing active by use of internal existing musics on Openscape musics... what should I do? Best...

Dears Hi, I want to know how to limit calls from internal stations to an specific number (e.g 2233) for example none of stations be able to call 2233 but calls from an specific trunk be able to call 2233 and the incoming call is from an specific external number which is 5244. the trunk is E1...

Dears Hi I just tested these answers in the thread965-1796483 but all were about limiting call duration for calls on subscriber number and I need to limit calls on some of ISDN CO analog trunks and the calls on PRI-E1 and the others of analog trunks shouldn't be limited (because E1 trunk calls...

thread965-1739382 Dears Hi I have a Openscape 4000 V7 and all out going calls are through a E1 link to a Panasonic TDE-600 temporary. we have been asked to configure an E1 link to ISDN network (to separate the Openscape ISDN calls from Panasonic) to test the ISDN network and ISDN network did...

Hi all I have a NCUI4 card when I tried to configure I found that the loadware is in compatible with my openscape 4000 V7 system, so I tried to install loadware by use of file from my server by hints of following document: OpenScape 4000 V7, Volume 4: IP Solutions, Service Documentation, Issue...

thread965-1788697 Hi all, I have some optipoint 500 standard and advance Phones and in some cases users need to have more phones on the desk and there are few cooper cables, I know I can add one more user for each master user by use of phone adapter but I dont know the command line: for example...

Dears Hi I have a Openscape 4000 Duplex system and need CDR records but when I use putty from a PC (192.0.2.99) to connect to 192.0.2.3 port 1201 or 1202 or 1206 there is nothing to display: __<dis-lssm; DIS-LSSM; H500:__AMO_LSSM__STARTED...

thread965-1744332 & thread965-1775410 HiPath 4000 V5 System Components - Software - Installation & Configuration.pdf Dears Hi, I am trying to re-install Operating system of a Hipath4000 V5 (with HDCF Card and original hard disk MHW2060AT) Duplex and I have red the attached PDF from Siemens and...

thread965-1756203 Dears Hi, I'm trying to configure a SIP trunk from hipath4K V5 via STMI2 to CUCM V9 by use of attached document but when I dial numbers like 5997 the STMI4 card blinks but no sound transmitted and no call is connected, commands i inserted is as following...

Dears Hi, Could you please tell me how to limit call duration for an specific subscriber number (even analogue, digital , HFA or even SIP). for example we have a control room witch there should be no limitation for its calls but we have some public out door kiosk telephones which should be able...

Dears, Hi, I have given an old ncui2 board with part number: Q2305-x10 and the owner says previus system administrator left the company and is not responsible, I need to reconfigure and re program the board by changing the board load-ware and I have the PKZNCI20 file but it seems the password...

Dears whould you please tel me how can I find Part numbers of software parts of Hipath 4000 or Openscape 4000 (version 1 to 10)? Already I need part number of license linux unify hipath 4000 Version 6.

Dears Hi, I am up to run a hipath 4000 V3 HicomVariantEx=V3.0 R7.4.* (HicomVariant=UV3.0-SA10) with dect station users and we inserted following commands (which are got from an other project regen file) TO activate Cordless E dect stations and I dont know how to register stations and are these...

Dears Hi, By use of this thread965-1744332 I am trying to install a clean installation of hipath 4000. I have ping of 192.0.2.3 in less than 1ms and firewall is completely off but when I test the connection in pchi tool V2.13 in special DSCXL Connection -> standards-DSCXL (duble tap and load...

Hi dears, I have a "Openscape 4000 V6 R2.17.1_rc5" and there is a "Alcatel-Lucent OmniPcx Enterprise V R12.0" as tandem switch and want to link with PRI (E1) with following configuration but caller ID which is sent by Openscape 4000 cannot be repeated to CO trunk by tandem switch and when ever...